• Here are a few signs that your axle shaft needs to be replaced:
  • 1. Excessive vibrations during operation. Excessive vibration from CV Axle failure can interfere with handling and ride characteristics, as well as the overall safety and comfort of the vehicle.  If the CV Axle is damaged enough to cause vibration, it is usually necessary to replace the CV Axle.
  • 2. Loud clicking during turns.When the CV Axle is worn excessively, the joint will loosen and make a clicking sound when turning
  • 3. Grease leaking from the CV joint onto the tire. Leaking boots can eventually cause CV joints to fail because dust and debris can get into the boots and damage the joints.
  •  
  • Fitment:
  • For

    • CV Axle For 2013-2019 Ford Escape 2013 Lincoln MKZ Front Driver Side AWD 66-2284

    Here are a few signs that your axle shaft needs to be replaced:

    1. Excessive vibrations during operation. Excessive vibration from CV Axle failure can interfere with handling and ride characteristics, as well as the overall safety and comfort of the vehicle.  If the CV Axle is damaged enough to cause vibration, it is usually necessary to replace the CV Axle.

    2. Loud clicking during turns.When the CV Axle is worn excessively, the joint will loosen and make a clicking sound when turning

    3. Grease leaking from the CV joint onto the tire. Leaking boots can eventually cause CV joints to fail because dust and debris can get into the boots and damage the joints.

     

    Fitment:

    For

    Ford Escape 2013-2019
    Lincoln Mkz 2013

    Please check compatibility notes & description for accurate information.Please be aware that the vehicle compatible chart on eBay is not 100% accurate, sometimes there may have Split year issues.If there is any uncertainty as to whether this part will fit or not, please provide us with OE# on the product that is needing to be replaced,the (YEAR, MAKE & MODEL), and VIN# through a message,that's the BEST way to check if this is the RIGHT FITMENT.

     

    How to Replace The CV Axle:

    Professional installation is highly recommended!!

    The procedure for replacing a CV axle will vary, depending on the year, make, and model of the vehicle.

    The following are general guidelines for educational purposes only. Consult your vehicle’s factory information for specific repair instructions and recommended safety procedures.

    1. Make sure the vehicle is in Park or that it is in gear with the parking brake set.

    2. Jack up the car and remove the wheel on the side where you will be working.

    3. Locate the axle nut. It will be in the direct center of the hub or wheel assembly where you removed the wheel.

    4. Some vehicles have a cotter pin to secure the axle nut.You’ll need to remove it using pliers to straighten the pin so it can be pulled out.You can spray it with lubricant if it’s rusted or stuck.

    5. Remove the axle nut.The wrench will help you safely remove the axle nut without having to use a pry bar.

    6. Carefully remove the bolts holding the brake caliper brackets in place and remove the calipers. Instead of dropping the caliper to dangle on the brake line, use a carabiner or other small hook to support the caliper and keep pressure off the brake line.

    7. Loosed the bolts holding the outer tie rod to the steering knuckle.If there’s another pin here, you’ll again need to use pliers to straighten it out.(In some cases, the steering knuckle and tie rod will not want to be separated. This will require a few light taps with a hammer or mallet.)

    8. Remove the bolts holding the hub to the strut tower. You’ll need to keep the nut from turning while unbolting the hub.

    9. Look further down the axle to see where it meets the transmission. Use your pry bar to pry the axle from the CV joint. You should be able to remove the axle at this point.You might see transmission fluid or have some leak while prying the axle. You may want to set up a pan or tray to catch the fluid.

    10. Insert the new axle into the transmission where the old one was removed. You can use your mallet or a hammer wrapped in a towel to carefully coax the axle into position.

    11. Attach the new axle to the hub and begin replacing the bolts you removed earlier in the process: 

    Hub/strut tower

    Tie Rod/steering knuckle

    Caliper

    12. Replace the axle nut. Use an impact wrench if you have one to safely tighten the nut.  If you don’t have one, get the nut as tight as you can without yanking on it while it’s up on stands.

    13. Replace the wheel and lower the vehicle. (If you need to tighten the axle nut further, it’s best to do it with the vehicle on the ground, so that you can really push on a wrench or bar to tighten without worrying about the vehicle falling.)

     

    Notes:

    1.Please allow slight manual measurement deviation for the data.Instruction not included,professional installation is highly recommended.Due to the different display and different light, the picture may not reflect the actual color of the item.

    2.Please check the model according to the auto parts list to avoid the model not fit after purchase!

    3.All the items will be shipped to the buyer's address on the Paypal account, so please make sure that the address is correct.

    4.Any damage during installation will not be refunded. Any modify action is excludes warranty.

    5.If you have any questions, feel free to contact us, and we will reply you as soon as possible with the exception of weekends and holidays.


    Item Specifics
    Brand APK
    Placement on Vehicle Front Left
    Type CV Axle Assembly,CV Axle Shaft
    Manufacturer Part Number 11831115
    OE/OEM Part Number 66-2284, 60-2284
    Manufacturer Warranty 1 Year
    Color Black
    Universal Fitment No
    Vintage Car Part No
    Interchange Part Number CV6Z3B437A
    Superseded Part Number CV6Z3B437B
    Input Shaft Connection Style Spline
    Number of Inboard Splines 35
    Output Shaft Connection Style Spline
    Number of Outboard Splines 27
    Drive Type AWD
    Fitment Type Direct Replacement
    ABS Ring Included No
    Axle Nut Locking Type Self Lock
    Spindle Nut Thread Size M24x2.0
    Spindle Nut Included Yes
    Notes Verify this part fits your vehicle using the compatibility chart
    Surface Finish Painted
    Mounting Hardware Included No
    Material Steel
    Quantity 1
    Weight 18L

    Payment

    1. We accept any payment which can be accepted by ebay.
    2. All major credit cards are accepted through secure payment.
    3. Payment must be received within 7 business days of auction closing.
    4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
    5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
    Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.

    Shipping
    1. We ship to your eBay order address. Please make sure your order address is correct before you pay.
    2. Items will be shipped within 1-3 business day when we received payment.
    3. Delivery time depends on destination and other factors;
    4. International buyers please note:
      a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
      b. Please check with your country's customs office to determine what these additional costs will be prior to buying.
    Returns

    All items will confirm the adaptation information of the model with you before delivery, please check the eBay news in time and provide your vehicle information so that we can confirm the product compatibility. If you have not responded to eBay messages within 3 working days after placing the order, we will still send the item for you, but we will not be responsible for return fees or other costs due to incompatibility of the item.
    Any other item shipping damage or use problem, please contact us via eBay message in time, we will reply you within 1 working day.

    Contact Us

    Our working time:
    Beijing time:Monday to Saturday 8:00 am to 6:00
    We do not work holidays in China

    If you send email to us,In our working hours will be resumed within 48 hours.
    If you we are not satisfied with the product or service,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution

    Shop Category
     Store Home
     Brake Rotors And Brake Pads
     Car Door Handle
     Car Window Switch
     Car Cab Side Light
     Instrument Lights
     LED Brake Light
     Interior Lights
     External Lights
     License Plate Light
     Car Headlight
     Roof Rack Cross Bar
     Rear Spoiler
     Sun Visor
     Center Console Armrest Lid
     Headlight Assembly
     Taillights Assembly
     Car Mirror Assembly
     Car Horn Trumpet
     Dash Cover Dashboard Pad Mat
     Cargo Cover
     Mirror Glass
     Bumpers & Reinforcements
     Fuel Pump & High Pressure Pump
     Running Boards & Step Bars
     Window Motors & Regulators
     Ignition Coils
     Splash Guards & Mud Flaps
     Fender Flares
     Wheel Spacers & Adapters
     Dipstick
     CV Joint Axle,Boots & Parts
     Wheel Hub Bearing
     Alternator
     Suspension & Steering
     Cooling Fan
     Radiator
    Hot Item
    Excellent Delivery

    content_src_url

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    New List Item
    CV Axle For 2013-2019 Ford Escape 2013 Lincoln MKZ Front Driver Side AWD 66-2284

    Here are a few signs that your axle shaft needs to be replaced:

    1. Excessive vibrations during operation. Excessive vibration from CV Axle failure can interfere with handling and ride characteristics, as well as the overall safety and comfort of the vehicle.  If the CV Axle is damaged enough to cause vibration, it is usually necessary to replace the CV Axle.

    2. Loud clicking during turns.When the CV Axle is worn excessively, the joint will loosen and make a clicking sound when turning

    3. Grease leaking from the CV joint onto the tire. Leaking boots can eventually cause CV joints to fail because dust and debris can get into the boots and damage the joints.

     

    Fitment:

    For

    Ford Escape 2013-2019
    Lincoln Mkz 2013

    Please check compatibility notes & description for accurate information.Please be aware that the vehicle compatible chart on eBay is not 100% accurate, sometimes there may have Split year issues.If there is any uncertainty as to whether this part will fit or not, please provide us with OE# on the product that is needing to be replaced,the (YEAR, MAKE & MODEL), and VIN# through a message,that's the BEST way to check if this is the RIGHT FITMENT.

     

    How to Replace The CV Axle:

    Professional installation is highly recommended!!

    The procedure for replacing a CV axle will vary, depending on the year, make, and model of the vehicle.

    The following are general guidelines for educational purposes only. Consult your vehicle’s factory information for specific repair instructions and recommended safety procedures.

    1. Make sure the vehicle is in Park or that it is in gear with the parking brake set.

    2. Jack up the car and remove the wheel on the side where you will be working.

    3. Locate the axle nut. It will be in the direct center of the hub or wheel assembly where you removed the wheel.

    4. Some vehicles have a cotter pin to secure the axle nut.You’ll need to remove it using pliers to straighten the pin so it can be pulled out.You can spray it with lubricant if it’s rusted or stuck.

    5. Remove the axle nut.The wrench will help you safely remove the axle nut without having to use a pry bar.

    6. Carefully remove the bolts holding the brake caliper brackets in place and remove the calipers. Instead of dropping the caliper to dangle on the brake line, use a carabiner or other small hook to support the caliper and keep pressure off the brake line.

    7. Loosed the bolts holding the outer tie rod to the steering knuckle.If there’s another pin here, you’ll again need to use pliers to straighten it out.(In some cases, the steering knuckle and tie rod will not want to be separated. This will require a few light taps with a hammer or mallet.)

    8. Remove the bolts holding the hub to the strut tower. You’ll need to keep the nut from turning while unbolting the hub.

    9. Look further down the axle to see where it meets the transmission. Use your pry bar to pry the axle from the CV joint. You should be able to remove the axle at this point.You might see transmission fluid or have some leak while prying the axle. You may want to set up a pan or tray to catch the fluid.

    10. Insert the new axle into the transmission where the old one was removed. You can use your mallet or a hammer wrapped in a towel to carefully coax the axle into position.

    11. Attach the new axle to the hub and begin replacing the bolts you removed earlier in the process: 

    Hub/strut tower

    Tie Rod/steering knuckle

    Caliper

    12. Replace the axle nut. Use an impact wrench if you have one to safely tighten the nut.  If you don’t have one, get the nut as tight as you can without yanking on it while it’s up on stands.

    13. Replace the wheel and lower the vehicle. (If you need to tighten the axle nut further, it’s best to do it with the vehicle on the ground, so that you can really push on a wrench or bar to tighten without worrying about the vehicle falling.)

     

    Notes:

    1.Please allow slight manual measurement deviation for the data.Instruction not included,professional installation is highly recommended.Due to the different display and different light, the picture may not reflect the actual color of the item.

    2.Please check the model according to the auto parts list to avoid the model not fit after purchase!

    3.All the items will be shipped to the buyer's address on the Paypal account, so please make sure that the address is correct.

    4.Any damage during installation will not be refunded. Any modify action is excludes warranty.

    5.If you have any questions, feel free to contact us, and we will reply you as soon as possible with the exception of weekends and holidays.

    Item Specifics
    Brand :APK
    Placement on Vehicle :Front Left
    Type :CV Axle Assembly,CV Axle Shaft
    Manufacturer Part Number :11831115
    OE/OEM Part Number :66-2284, 60-2284
    Manufacturer Warranty :1 Year
    Color :Black
    Universal Fitment :No
    Vintage Car Part :No
    Interchange Part Number :CV6Z3B437A
    Superseded Part Number :CV6Z3B437B
    Input Shaft Connection Style :Spline
    Number of Inboard Splines :35
    Output Shaft Connection Style :Spline
    Number of Outboard Splines :27
    Drive Type :AWD
    Fitment Type :Direct Replacement
    ABS Ring Included :No
    Axle Nut Locking Type :Self Lock
    Spindle Nut Thread Size :M24x2.0
    Spindle Nut Included :Yes
    Notes :Verify this part fits your vehicle using the compatibility chart
    Surface Finish :Painted
    Mounting Hardware Included :No
    Material :Steel
    Quantity :1
    Weight :18L


    1. We accept any payment which can be accepted by ebay.
    2. All major credit cards are accepted through secure payment.
    3. Payment must be received within 7 business days of auction closing.
    4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
    5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
    Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.

    1. We ship to your eBay order address. Please make sure your order address is correct before you pay.
    2. Items will be shipped within 1-3 business day when we received payment.
    3. Delivery time depends on destination and other factors;
    4. International buyers please note:
      a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
      b. Please check with your country's customs office to determine what these additional costs will be prior to buying.

    All items will confirm the adaptation information of the model with you before delivery, please check the eBay news in time and provide your vehicle information so that we can confirm the product compatibility. If you have not responded to eBay messages within 3 working days after placing the order, we will still send the item for you, but we will not be responsible for return fees or other costs due to incompatibility of the item.
    Any other item shipping damage or use problem, please contact us via eBay message in time, we will reply you within 1 working day.

    Our working time:
    Beijing time:Monday to Saturday 8:00 am to 6:00
    We do not work holidays in China

    If you send email to us,In our working hours will be resumed within 48 hours.
    If you we are not satisfied with the product or service,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution


    All rights reserved.