Our LED bulbs only replace halogen or led headlamps.Can not replace the HID headlamps. Please double check before order.
Specifications:
Chip Type: LED
Bulb Side Type: 2 Sides
Placement on Vehicle: Front
light Source Model: Chip,two side leds,super bright
Power: 100w/Set & 50w/bulb
Lumen: 16000LM
Operating voltage: DC9-30V
Beam Type: High beam & Low beam & Fog beam
Material: Aluminum PCB and PA66+30% GF Plastic
Beam Angle: 360°
Color Temperature: 6000K-6500K Cool White
Lifespan: over 50000h
Working Temperature: -40-+80 Centigrade
Waterproof rate: IP 68
Connector Type: Plug and Play
Certifications: CE, RoHS, ISO9002, IP68.
Application: LED Headlights Headlamp Lamp Bulbs High or Low Beam
Chip Type: LED
Bulb Side Type: 2 Sides
Placement on Vehicle: Front
light Source Model: Chip,two side leds,super bright
Power: 100w/Set & 50w/bulb
Lumen: 16000LM
Operating voltage: DC9-30V
Beam Type: High beam & Low beam & Fog beam
Material: Aluminum PCB and PA66+30% GF Plastic
Beam Angle: 360°
Color Temperature: 6000K-6500K Cool White
Lifespan: over 50000h
Working Temperature: -40-+80 Centigrade
Waterproof rate: IP 68
Connector Type: Plug and Play
Certifications: CE, RoHS, ISO9002, IP68.
Application: LED Headlights Headlamp Lamp Bulbs High or Low Beam
Package Contents:
4 x H1 LED Headlight Bulbs
4 x H1 LED Headlight Bulbs
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the light bulb when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the light bulb when adjusting the bulb.
On Jun 13, 2024 at 03:26:21 PDT, seller added the following information: