🚩All System Diagnostic Scanner: Your Best Choice ANCEL FX8000:
Get comprehensive analysis of ECM, IM-MO, TRANS, ABS, SRS, SAS, DPF, EVAP, TPMS, BMS, EPB, AC and other available on-board systems. Pull, clear their codes; check freeze frame data; view live stream in detailed text, merged graph you need to diagnose, repair, and maintain for majority of car makes and models worldwide.
Actual tests vary by vehicle manufacturer, year, make. Typical special test options include but not limited by:
For Engine: Poor lubrication, Failing oil pump, Oil deposits and debris, Inadequate fuel and air compression, Leaking engine coolant, Blocked engine radiators, Prolonged engine detonation, Aged spark plugs, etc.
For EPB: Remind you to reset the brake pad, especially if you have replaced it.By using this system, the braking process is therefore made much simpler & easier.
For BMS: The scan tool can evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle. Note: Not all vehicles need to do the battery reset after changing batteries.
For SRS: A bad seat belt, a corroded crash sensor, or some water intrusion in a connector, etc.
For ABS: Blown sensor fuse, Low brake fluids, and Faulty sensor, etc.
For Transmission: Grinding or shaking sensation in gear, Whining, humming or clunking noises, Burning smells, Gears slipping, Low or leaking transmission fluid, etc.
For TPMS: Low tire pressure, Faulty in tire pressure monitor control module, Unknown tire sensor, Failure to identify tire sensor, etc.
And many other systems like:
[ESP/Headlight/Steering Angle/Air Suspension/Window/Seat/AC/Start-stop Systems/Electronic Power Steering & Motor Assisted/Power Steering/Rain Sensors/4WD System]

🚩FX8000 6 Hot Reset Service:
Oil Lamp Reset:It allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.
ABS Bleeding:the auto bleed procedure is used on brake pump equipped vehicles.
SAS Steering Angle Calibration:to perform calibration for the Steering Angle Sensor, and clear fault memory.
Electronic Parking Brake reset:Deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.
Electronic Throttle Position Reset:Initialize the throttle actuators so that the "learned" values stored on ECU are returned to the default state.
Battery Registration/Battery Maintenance:allows the scan tool to evaluate the battery charge state, monitor the close-circuit current,register the battery replacement, and activate the rest state of the vehicle battery system.
🚩ANCEL FX8000 supports FULL OBD2 Functions Of ENGINE SYSTEM
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream: Reads and displays live /PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability

🚩Other Feature of ANCEL FX8000:
1. DTC Library: Allows you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.
2. Diagnostic Feedback: Use this option to submit the vehicle issue to us for analysis and the report can be saved offline.
3. Diagnose Report Share & Printed: you can share the diagnose report to your email ,then printed via computer.
4. Sensitive Touch & Keypad input are supported
5. Global vehicle coverage.Including India and Russian car brands. And many more...
🚩Extensive Worldwide Vehicle Models Coverage:
Asia: Compatible with Acura, Fit for Daewoo, Fit for Honda, Fit for Hyundai, Fit for Infiniti, Fit for Isuzu, Fit for Kia,
Fit for Lexus, Fit for Mazda, Fit for Mitsubishi, Fit for Nissan, Fit for Nissan GT-R, Fit for Samsung,
Fit for Subaru, Fit for Suzuki, Fit for Toyota
Europe: Compatible with Abarth, Fit for Alfa Romeo, Fit for Audi, Fit for BMW, Fit for Bugatti, Fit for Dacia, Fit for Ford EU,
Fit for Fiat, Fit for Jaguar, Fit for Lancia, Fit for Mercedes, Fit for Mini, Fit for Opel, Fit for Peugeot, Fit for Porsche,
Fit for Renault, Fit for Saab, Fit for Seat, Fit for Skoda, Fit for Smart, Fit for Sprinter, Fit for Land Rover,
Fit for Citroen, Fit for Volvo, Fit for VW, Fit for Vauxhall
USA: Compatible with Buick, Fit for Cadillac, Fit for Chevrolet, Fit for Dodge, Fit for Ford, Fit for GM, Fit for Chrysler,
Fit for Jeep, Fit for Lincoln
🚩Support Languages:
English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean.
🚩ANCEL FX8000 Technical Parameters:
Operating System: Android 7.1
Processor RAM: 1GB
ROM: 16GB
Display: 7 inch IPS touch screen
Connectivity: Mini USB 2.0, Wi-Fi
Battery: 6000mAh lithium-polymer battery
Battery Life: more than 8 hours
Product Size: 9.8x5.5x1.5(inch)
Product Net Weight: 700g
🚩ANCEL FX8000 Package List:
1 * FX8000 Handset
1* OBDII Diagnostic Cable
1 * 5V DC Charging Cable
1 * Power Adaptor
1 * Quick Start Guide
1 * User Manual