|
|
|
|
|
|
|
|
|
|
|
|
|
Feature :
* A cool headlights gives your truck great looking style and performs at a first class level. Our headlights is designed to fit your exact make & model. Step up from the ordinary, it's time replace your factory headlights today!
*High quality generic branded lights that are indentical to OEM lights. Safety and Durable.
*Safety & Fashion.*High grade plastic. For toughness, impact resistance, and heat resistance.
Compatibility with:
Installation:
1.Undo the screws, clips, or retainer springs that hold the headlight in place.
2.Disconnect the wiring from the assembly.
3.Detach the headlight from the vehicle to replace it with a new one.
4.Fit in the new headlight assembly.
5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
6.Reconnect the wiring that was unplugged from the assembly.
7.Put back the grille and other components that you removed. Seal them back into place.
8.Test the new assembly.
Note:
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1. Find the adjustment screws.Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4.Test your results.
| Item Specifics | |
|---|---|
| Installation Guide | Not Included; Professional installation is highly recommended |
| Other Part Number | OE Replacement Driving Lights Lamps Headlights Headlamps LH RH |
| Manufacturer Warranty | 5 Years |
| Brand Type | Aftermarket Branded |
| Lighting Technology | LED,Halogen,Xenon |
| Fitment Type | Direct Replacement |
| Bulbs Included | No |
| Beam Type | High Beam: 9005(Not included) Low Beam: 9006(Not included) |
| Placement on Vehicle | Front, Left, Right |
| Light Bulbs | Does Not Include Bulbs & Wiring, Reuse Current Accessories |
| Brand | KAC |
| Specifics | Factory OE Replacement |
| Type | Bulb, Lens, Reflector |
| Interchange Part Number | 2Piece Set Assembly Unit Pairs Turn Signal Corners Bumper Housing |
| Headlight Style | Factory |
| Compatible/Replacement For | 1999-2002 Chevrolet Silverado / 2000-2006 Chevrolet Suburban |
| Lens Color | Clear |
| Notes | Additional Wiring Is Required For LED DRLs To Function |

Store Category Excellent Delivery |
Headlights Assembly For Chevy Silverado 1999-2002 Tahoe Suburban 2000-2006 SAE
Feature : * A cool headlights gives your truck great looking style and performs at a first class level. Our headlights is designed to fit your exact make & model. Step up from the ordinary, it's time replace your factory headlights today! *High quality generic branded lights that are indentical to OEM lights. Safety and Durable. *Safety & Fashion.*High grade plastic. For toughness, impact resistance, and heat resistance.
Compatibility with:
Installation: 1.Undo the screws, clips, or retainer springs that hold the headlight in place. 2.Disconnect the wiring from the assembly. 3.Detach the headlight from the vehicle to replace it with a new one. 4.Fit in the new headlight assembly. 5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed. 6.Reconnect the wiring that was unplugged from the assembly. 7.Put back the grille and other components that you removed. Seal them back into place. 8.Test the new assembly.
Note: Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground. 1. Find the adjustment screws.Firstly, locate the adjustment screws on your vehicle. 2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens. 3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall. 4.Test your results.
We accept PayPal, apple pay, Google pay, credit card, VISA/Master Card.
Payment is expected within 4 days from the end of the auction.
We send all the items are based on your paypal address. Therefore, please make sure your paypal address is valid.
We only ship to United States address!
1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.
2. Please check your shipping address carefully before checkout, it can't be changed if order completed.
3. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
30 Days Free Return and Money Back
Please kindly contact us before return, our representatives will send you the detailed return instruction.
Please feel free to contact us if you have any questions.
we will try our best to handle it well within 24hours,except International Holiday.
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||