Parasound ZoneMaster 2350 Mint Condition Black
Product Specs
General- Frequency Response: 10Hz – 70kHz, +0/-3dB 20Hz – 20kHz, +0/-0.8dB
- Total Harmonic Distortion: < 0.05% at typical listening levels < 0.9% at full power
- Inter-channel Crosstalk: 70dB at 20kHz
- DC Trigger Requirements: +9Vdc to +12Vdc, 5mA
- Audio Trigger Requirements: 2mV audio signal (8-15 minutes turn off delay)
Power Output – RMS, Both Channels Driven (20 Hz – 20 kHz)- 350 watts x 2 @ 8 ohms
- 600 watts x 2 @ 4 ohms or 2 ohms
Minimum Speaker Impedance (Output A+B)- Stereo or Mono Mode: 2 ohms
- Subwoofer Mode: 4 ohms
- Note: Operation at these minimum impedances might require additional ventilation
Input Sensitivity- 2 Volts = Full output (350 Watts @ 8 ohms)
- Total gain = 29dB (Level controls set to Maximum)
S/N Ratio- > 100dB, input shorted, unweighted
- > 114dB, input shorted, IHF A-weighted
High and Low Pass Crossovers- Sub Mode and Sub out jack: 80Hz, 24dB per octave
- High Pass Filter: 30Hz or 80Hz, 12dB per octave
AC Power Requirement- 1500 Watts maximum
- 100 Watts typical (music playing, typical listening level)
- 30 Watts idle (no music playing)
- 0.5 Watts in standby
- 110-240 VAC 50/60Hz
Dimensions- Width: 17.25" (438 mm)
- Depth: 14.5" (368 mm)
- Depth: 16.25" (412 mm) with cables connected Height, with feet: 4.25" (108 mm)
- Height, without feet: 3.5" (89 mm), 2U
Weight- Net: 15 lbs. (6.8 kg)
- Shipping: 22.25 lbs. (10.1 kg)
Product Features
- Powerful two-channel amplifier perfect for CI applications
- 350 watts x 2 @ 8 ohms
- 600 watts x 2 @ 4 ohms
- 2 ohms stable for driving multiple speaker pairs
- Two pairs of speaker outputs with A/B buttons
- Lockout switch on rear panel to disable A/B buttons
- High pass filter, switchable for 30Hz or 80Hz
- Automatic on/off by 12V trigger w/ looping output
- Automatic on/off by audio signal
- Speaker level input enables integration with systems lacking preamp output jacks
- Parasound designed class AB input stage w/ premium Class D power stage
- Subwoofer mode for driving multiple in-wall subs without the need for an external crossover
- Mono mode combines L and R for single speaker applications
- Mono full range preamp output
- Subwoofer 80Hz, 24dB/oct. low pass preamp output
- Looping left and right output jacks
- Left and right input level controls
- Efficient, low heat design
- Short circuit and overload protection
- 0.5 watt standby power consumption meets EU and Energy Star requirements