SUNLU Filaments：
| Printing Temp&Speed | Heated Bed Temp | Net Weight | Feature | |
| PLA |
200-210℃：50 -100mm/s 210-240℃：100-200mm/s |
50-60℃ | 1KG | PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use; Good compatibility, suitable for beginners to get started printing！ |
| High-Speed PLA |
190-210℃ ：50-150mm/s 210-230℃ ：150-300mm/s 230-260℃ ：300-600mm/s |
50-60℃ | 1KG | Supports fast printing at 600mm/s; Good fluidity, fast printing without clogging, no shortage of materials: volume flow rate of 30mm ³/s. |
| PLA+ |
195-205℃：50 -100mm/s 205-220℃：100-300mm/s |
50-60℃ | 1KG | The wire has good toughness and is not brittle or broken; Has good comprehensive mechanical performance, particularly resistant to drops, with an impact strength of up to 8KJ/m2, which is 2-3 times that of other PLA+on the market; |
| PLA+2.0 |
195-205℃：50 -100mm/s 205-220℃：100-300mm/s |
50-60℃ | 1KG | Good impact toughness, resistant to falling and impact; Supports 300MM/S fast printing; |
| PLA Matte |
205-215℃：50 -100mm/s 215-245℃：100-230mm/s |
50-60℃ | 1KG | Matte texture, the surface of the model is delicate without layering, without any plastic feel, and has a frosted texture！ |
| PLA Meta |
185-195℃：50-100mm/s 195-225℃：100-200mm/s |
50-60℃ |
1KG | Good liquidity, supports fast printing without clogging; Printing temperature is 10 ℃ lower than ordinary PLA, more energy-efficient and environmentally friendly; Good toughness, not easy to break, and the printed works are resistant to falling and smashing. |
| SILK | 205-215℃：50 -100mm/s 215-235℃：100-200mm/s |
50-60℃ |
1KG | The model has a silky smooth surface and beautiful colors！ |
|
PETG
|
230-240℃：50 -100mm/s 240-260℃：100-200mm/s |
60℃-70℃ |
1KG | Good toughness, resistant to drops and impacts; Good acid and alkali resistance! |
|
High-Speed Matte PETG
|
205-215℃：50 -100mm/s 240-250℃：100-300mm/s 260-270℃：300-600mm/s |
70℃-80℃ |
1KG | PETG that supports fast printing at 600mm/s; Matte texture, with a delicate printed surface; Not easy to draw; |
|
ABS
|
250-260℃：50-100mm/s 260-280℃：100-200mm/s |
80-100℃ (Insulated and sealed environment,better effect) |
1KG | High strength, good toughness, sturdy and durable! |
|
ASA
|
250-260℃：50 -100mm/s 260-280℃：100-200mm/s |
90-110℃ | 1KG |
Good weather resistance - good resistance to UV/rain/heat, suitable for outdoor use;Can withstand high temperatures up to 90 ℃;High strength, good toughness, sturdy and durable; |
3D Filament Storage Tips:
- We recommended storing filament in a sealed plastic bag or box after each print (a large ziplock or Tupperware works well).
- In extreme cases where the filament gets damp, you can bake it in an oven with 50-degree Celsius for about an hour to restore its dryness.
- Each time after use of your 3D Printer Filament. Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use.
Contact us
The best way to contact us is by eBay messages.
We always reply eBay messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all eBay messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)
Please do not leave any low detailed seller ratings, neutral or negative feedback before contacting us.
We commit you 100% satisfaction guarantee.
Feedback
1. We will appreciate a positive feedback with all 5 star rating when you are satisfied.
2. Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us.
3. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.
4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.
