You are buying the latest 2025 generation 2 LemonRx® DSMP 7-channel Diversity receiver from one of the most experienced and respected aeromodellers in the country with over 50 years practical experience in all branches of the sport! 

We fly and stand behind what we sell!

LATEST Genuine Generation 2 LemonRX® FULL_RANGE DSMP™ Lightweight DMSX/DSM2 Compatible 7 Channel Receiver with Diversity Antennas

  • This is a DSMX compatible receiver and it is also fully compatible with all JR, SPEKTRUM and cloned DSM2 transmitters.

  • It features dual antennas with separate processing to determine which signal to use for best reception therefore increasing the effective range without the need for a separate satellite receiver. 

  • It has a failsafe setting which remembers the position of all channels. Setting the failsafe is a simple matter of setting the controls, inserting the bind plug and pressing a button on the receiver.

  • Built-in Diversity antennas for solid control at all altitudes and attitude. Just make sure the RX antenna are positiioned at 90 degrees to each other in the model. An additional Satellite Rx can be added if required.


How dual DIVERSITY antennas work
An independent processor monitors an incoming signal and choose the appropriate antenna for reception. This allows 2 different location for installing the antennas along with different orientation. Satellite is no longer needed for receiver diversity. This greatly reduces weight with increased overall reliability in comparison to the use of a primary receiver with satellite receiver.

We are enthusiastic model flyers and the photos are only to illustrate the wide range of models that we are currently flying our LEMON RX® receivers with- THEY ARE NOT FOR SALE here!.

They are incredible value for money, proving very popular and totally reliable and have fantastic range (we regularly get 80 yards plus low power range when used with the LEMON RX DIY or PLUG & GO 2.4 RF modules.

https://youtu.be/Nv1Ma6YhCMM

Here is what our customers are saying...

FANTASTIC! I'm using these to move across from 35mhz to 2.4ghz (FINALLY!) and these make it affordable. They have been superb: I've since flown with them so I can say with conviction: Very easy to bind, incredible range, nice and compact, short antenna, just great all round. Consequently, the list of models on my new Spektrum transmitter is ever-growing! Thanks again!

We sell the FULL LEMON RX® PRODUCT RANGE,- so if what you need is not listed, please contact us by WhatsApp or message to 07785926158 to find out if we have it or we will get it for you usually within 7-10 days.

UK stock, Same day dispatch when payment is received by 3pm. (working days)  Can also be collected from Swaffham, Norfolk

Product Specification

Dimension:
42.0mm(L) x 23.1mm(W)
Recommended voltage range:
3.5V to 8.5V (2S LiPo capable)
Technology:
DSMP™ with GEN2 SDR stack (DSMX / DSM2 compatibility)


Highlight

DSMP 7-channel receiver is DSMX/DSM2 compatible that provides superior performance with diversity antenna. 

Quick Reference Guide

LM0080_LM0081_ Instructions.pdf - Google Drive

Failsafe

Failsafe will be activated when the receiver has lost signal for more than 2 seconds. Failsafe can only get set when the unit has just been powered on within 60 seconds.

Activate all-channel failsafe:
- Power on the unit that is already bind to a transmitter with transmitter on
- Ensure green LED is off (failsafe is disabled prior to activation)
- Set the channel position required and stay still
- Press and hold the F button for 3 seconds until green LED is on.

Deactivate all-channel failsafe:
- Power on the unit
- Press and hold the F button for 3 seconds until green LED is off.


1S LiPo Application

The minimum recommended safe supply voltage is 3.5V

NOTE:

  • The battery must be capable of maintaining that voltage while delivering the required maximum load current to the receiver and servos. In some cases you MAY be able to operate at a lower voltage (for example a well discharged 1S LiPo cell) but you must test it in practice to be sure.


Binding
1) Plug bind plug to the receiver.
2) Provide power to the unit. LED flashes quickly.
3) Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
4) Remove bind plug.

Failsafe Enable (Video showing 10-Channel receiver)
Video:https://www.youtube.com/watch?v=FyW1v12dv_k
1) Bind the receiver and do not remove bind plug.
2) Upon successful binding, set the transmitter sticks / channels to the desired failsafe position.
3) Press the side pushbutton to save the current position in failsafe mode.
4) Check for green light on. Green light on indicates failsafe is successfully enabled.
5) Remove bind plug and power cycle the receiver.

Failsafe Disable (Video showing 10-Channel receiver)
Video:https://www.youtube.com/watch?v=xpb1tvBvA2E
1) Bind the receiver and do not remove bind plug. If green light is on Failsafe is currently enabled, pressing the side pushbutton will disable Failsafe.
2) Check for green light off indicates Failsafe disabled.
3) Remove bind plug and power cycle the receiver.

Note:
1) This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc.
2) This is not an underground black market fake Spektrum product. Lemon Rx quality is guaranteed.
3) Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spektrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).