Epoxy Resin ULTRA CLEAR PRO, FAST CURING 2:1 Art, River (FREE FREIGHT)

 

ULTRA CLEAR PRO - EPOXY RESIN  -  2:1 ratio by WEIGHT

Australian made, Platinum Ultra Clear PRO Fast Setting epoxy is an alternative to the other 55 varieties of Platinum resins. Platinum UltraClear is twice as fast as Deep Cast resins, and is suitable for making small pieces, cheeseboards, small arts, coatings, etc. To see just a few of the range of Platinum Epoxies - click link to view resins like our Rapid cure epoxies, food grade (if you require these?) High temperature epoxies (up to 1830 deg C), just some of over 56 different  resins:  https://www.ebay.com.au/str/diycomposites

 

Please note: Picture of jugs are for label notes only (photographing round bottles, misses half the info!)

 

With Platinum UltraClear PRO, You can shorten the curing time even further by applying mild heat. Suitable for making small pieces (pendant; coaster; anything weights from a few grams to a few hundreds gram) and flat surface coating.  

Fast setting within 24-36 hours. 

Do not pour over 12mm to avoid overheating. 

Avoid mixing over 1Ltr each time. 

Mixing Ratio 2:1 by weight.

Note: Always close the caps after each usage, otherwise the contents might turn cloudy and skin might form if the bottle cap left open. Larger quantities available upon request, please contact us.

 

100% Australian OWNED and Australian MANUFACTURED  -  Best Quality, Best Value and Reliable Epoxy Resin 

These are high quality products & MADE IN AUSTRALIA - NOT overseas products getting relabelled and filled in Australia, and please don't risk your work on the cheap stuff - can't tell you how many customers have told me they purchased the cheaper resin and it ruined their work - there are important standards for art resin.

Our Epoxy Resin have decisive advantages and benefits to the user over those offered by other brands. Premium products using premium ingredients from the best suppliers.

Why you should choose Platinum UltraClear PRO Epoxy Resin: 

★ No VOC; Zero Solvent; BPA Free; Eco Friendly; Meet and Exceed Australian Standard AS 2311-2017 and ASTM D3960-05 

★ Crystal Clear Finish: Cures Crystal Clear. One of the clearest epoxies you can find. Suitable for wooden bar tops, embedding pictures, bottle cap table projects & more 

★ UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light 

★ Self Level Mixture: Will self level over surfaces including corners, bar rails and edges leaving consistent thickness 

★ Superior Air Release: Some epoxies may bubble, fish eye or crater. Our UltraClear formula features superior air release, minimizing these concerns 

★ Impact Resistant: Cures super strong, leaving a smooth impact resistant surface

★ Minimal odour and NOT AT ALL yellowing after long period of time. 

★ Easy To Use: 2 to 1 by WEIGHT mix ratio

 

Our Epoxy will leave your projects with a durable, UV resistant, impact resistant high gloss finish. Don't ruin a one-of-a-kind project with an inferior epoxy.      

Coverage depends on temperature (Epoxy resins before mixing act a little like honey - in summer, they are very runny while in winter they are less runny) and so coverage can vary up from 250 grams per square meter per coat.

Platinum UltraClear PRO is a 2 part (2 parts A and 1 part B) Fast Curing Epoxy resin which when mixed with hardener is poured into a mould and sets to a strong, hard finished product.

UltraClear PRO is resistant to most household chemicals and can withstand surface temperatures around 80-85oC (resisting marks from hot drinks etc). 

The special fast curing character allows this product demould within 24 hours.

The fast curing of UltraClear PRO is not suitable for deep casting. We have about 56 other resin types to suit every need. This product is for someone who is in a hurry. For even shorter cure times, use Platinum 360+, UltraClear FG or SuperCoat Rapid (these are all food grade). This product can be used for outdoor use.     

 

Directions for use: Mix resin and hardener EXACTLY in 2:1 ratio (Note: by weight not by volume) Use a plastic container for mixing. DO NOT use metal, especially aluminium containers to mix. Mixtures will turn milky colour in aluminium containers. The plastic container must be extremely clean, free of dirt; water; oil; and other contamination. Tiny contamination would deteriorate the quality of final result. Once the product is poured into the mould, do not stir it or touch the surface to avoid defects. Most foam will float to the surface and burst itself. The curing will take 12 to 36 hours. 

 

Following factors affect the curing time:

1. Mixing quantity (the more you mix, the fast it cures and vice versa). 

2. Room Temperature (higher room temperature will speed up the curing)

Mixing ratio: 2:1 (2 Parts A and 1 Part B). 

Application temperature: Wide temperature range through summer to winter. 

Pot life(working time): 1-2 hours (Data based on 100ml mixing; 20 degree C room temperature).

Please pour this product into mould as soon as possible, to avoid bubbling. 

Time to reach non-tacky: 5-18 hrs Depending on the room temperature (Data based on 100ml mixing). 

Time to reach full cure: 24 hrs (Data based on 100ml mixing). 

Viscosity: 600 cps for Part A (Brookfield 20 rpm). 150 cps for Part B (Brookfield 20 rpm). 

Clarity: Pt-Co value < 10 for both Part A and Part B

Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM. 

Shelf life: 12 months

 

 

 

Please Note: As this product is very pure epoxy, and it acts in a similar manner, just like pure honey (epoxies act similar to honey in that, during winter honey is extremely thick and yet in summer, that same honey is very thin and runny). So it is with epoxies. And just like pure honey which sometimes turns to sugar? Pure Epoxy resin can act in a similar way and develop crystals (usually in Part A). This is not from faulty resin but common thought is that it is from the cylic hot days and cold nights when stored.  An easy fix is to super heat the jugs up in scalding hot water (over 65 deg C) for about 20 mins and this will restore the resin to perfectly clear. The heating is also good to help remove air bubbles trapped in the epoxy due to transportation. Any crystals that are forming, but as yet are not visible will be dissolved. Without doing the above? One could experience air bubbles in the mix when adding the hardener to the resin base. Such a simple exercise to do with any brand of resin.

 

If I have to do a critical pour or application, as a tip, I heat the jugs up the day before the pour and let them cool down for the day of my pour. Additionally when mixing the two parts, I decant into the mixing container by pouring down the side of the container. All this effort is to try to limit any possible air bubbles that could ruin the finished product. Even when mixing, I use a wide rule and do not even take it off the bottom of the mixing container. Mixing is so important to get the best results and can take 3 to 5 mins.

 

For material safety sheet and TDS – aaci.au

CAUTION: All epoxies (except FDA Food Grade, share the same chemical nature. Treat this like any other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN. For those with allergies when using Epoxy resins? Use Platinum UltraClear Food Grade, Platinum 360+ or Platinum HiTemp100. 

 

Disclaimer: You must be a least 21 years old to order and possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer. 

 

May be supplied in different containers due to availability

 

 

POLICIES:

Payment:

We prefer paypal payment but also accept bank deposit

For Dangerous Goods / Non free freight items - Please use Buy It Now, not the shopping cart. You can then request a total so we can invoice you (including freight charges - see Freight Charge tab).

For bank deposit - Commonwealth Bank. BSB - 062827 - Account - 10227187 (Consolidated Coatings - Des wages). Please eBay message to let us know if paying by bank deposit.

 

Freight Charge:

Q. How much will my freight cost?

A. Items with FREE FREIGHT in the TITLE when sent on their own within Australia will cost zero! Nothing! Free! 

We know that you will understand that the cost of freight to distant or remote areas in some cases is more expensive than the item itself. As such a surcharge for transport sometimes has to be applied to cover the long distances or remote areas of Queensland, NT and Western Australia and some other places.  We will contact you if you are in one of these areas and advise of the surcharge and can even send you an invoice for this surcharge prior to sending the goods.

NON Free Freight items are Dangerous goods or bulky items so will be sent by a courier and cannot go to a PO Box. They will incur a freight charge. Due to increasing Dangerous Goods freight prices, please email us for a freight quote. Please include items required, postcode and suburb. 

We request you leave a phone number for the courier.

 

Shipping

Delivery is not available on weekends or public holidays. Please allow up to 14 working days for delivery, after the proof of payment is received. Please make payment within 3 working days of purchase, or sale may be cancelled.

Goods will be sent by Australia Post or Courier, at our discretion. If one method is preferred or cannot be used, please email to confirm freight costs, and make a note on the sale.

 

Feedback

*****FIVE STARS REALLY DO MATTER*****

Four stars are nice but eBay only rewards those sellers who receive five stars in all categories! If for ANY reason, you feel you did not receive 5 star service in all categories, please contact us before leaving feedback and give us the opportunity to EARN it from you. Rest assured you are our most valued asset and we will go that extra mile for your satisfaction. We want you to be our HAPPY customer :)

For technical advice on our products, please view our FAQ and Technical Help Page (From our eBay storefront)

You can contact us through eBay messages, or send us an email

Don't forget to 'Like' us on Facebook - DIY Composites