NOW WITH FREE INLET GASKET!
NEW replacement engine manifold inlet suitable for using with the Replacement AR2-12 Carburettors.
The inlet has a 20 mm outer diameter pipe and 15 mm internal.
Please note the 20 mm may mean you have to file down the pipe slightly or sleeve to fit the clamp on. Some slight filing of fins may also be required to fit. Please double check.
To fit Raleigh and Mobylette Mopeds with the AR2 Carburettor such as the 88,89
**WARNING:
- Please note the angle of the inlet means that this may not be suitable for many Mobylettes and the range of Raleigh Mopeds without modification. There may not be any practical way of doing this so please read important facts below.
- The original manifold inlet on a Mobylette AV42 for example has an angle of 40 degrees
- This new manifold inlet only has a angle of 20 degrees meaning if fitted to an AV42 the AR2 carburettor may not fit under the frame as the carburettor will be tilted at a higher angle than originally.
Please do check suitability before purchase.
About Us
Thank you for looking at my item which is supplied direct from Classic Moped Spares. I am passionate about Motorcycle and Mopeds and have been providing the service of parts supply for many years to help save old machines. I really hope that you will be happy with your purchase.
I appreciate your support by buying from me, so that I can continue to help you and others. If your item is not as expected please contact me and I will try to help.