Description:
☆ If your gas cylinder has worn out on your chair or stool, you may want to consider this Heavy Duty option.
☆ This replacement office chair gas lift cylinder is more heavy duty than standard chair gas lift cylinders. It's a great replacement option for damaged or worn out gas lifts on office chairs, task chairs, executive chairs, & more! While this gas cylinder will fit the majority of chairs and stools, it will not fit all. Please measure your original cylinder to be sure. Minimal dimensional differences shouldn't alter performance of lift when installed. Always remove gas cylinder with care and never heat or puncture.

 

Feature：
☆ HEAVY DUTY: Gas lift cylinder that holds great weights - tall center support column of the chair. Holds up to 450 lbs on most office, executive and computer chairs.Highest End Class 4 gas cylinder on market.
☆ STANDARD CYLINDER DIAMETER: Outer cylinder: 2 inches, Inner cylinder: 1.1 inches. Please confirm the measurement before ordering.
☆ SMOOTH & NOISELESS: Full 360 degree rotation, smooth and noiseless movements to all directions
☆ 5’’ STROKE FOR ADJUSTING CHAIR HEIGHT: Minimum length: 10 inches; maximum length when fully extended: 15 inches; adjustable range: 5 inches
☆ EASY INSTALLATION : Can be installed easily with no additional screws required.

 

Product details：
Color:Black
Product Dimensions:11"D x 8.6"W x 2"H
Material:Alloy Steel
Frame Material:Alloy Steel
Room Type:Office

 

Specifications:
Material: Steel
Outer Cylinder Diameter: 2’’
Inner Cylinder Diameter: 1.1’’
Minimum Length: 10.5’’
Length when fully extended: 15.5’’
Stroke: 5’’
Bearing Capacity: 450 lbs

 

How to install the gas lift cylinder on your own?
1, Tip the chair onto its side.
2, Use the rubber mallet to tap and remove the base of the chair away from the seat.
3, Use the pipe wrench to clamp tightly onto the top of the cylinder. Twist and then pull up in order to remove the cylinder.
4, Remove the orange cap of the new cylinder. Insert the bottom of the cylinder into the center of the chair base.
5, Carefully lift both the chair base and the chair cylinder into the chair mechanism. The parts will then fasten on their own.

Package Content:
1 x Office Chair Gas Lift Cylinder

 

Any problem, please free to contact us first we will help you solve it soon.Thanks !