You are buying the latest 2026 LEMON RX® PLUG AND GO 2.4GHz Module from one of the most experienced and respected aeromodellers in the country with over 50 years practical experience in all branches of the sport!
We understand, use, fly and stand behind what we sell! The free advice comes from 50 years of experience with radio control! PLUG AND GO 2.4 GHz MODULE FOR JR BAY COMPATIBLE TRANSMITTERS (DSMX/DSM2 COMPATIBLE) such as FrSky TARANIS & X7/TURNIGY 9X/ RADIOMASTER TX16 OR ANY OF THE JR MODULE TRANSMITTERS.
Note: Early JR Txs, such as the Apex series, require an easy mod by Removing some of the Plastic case around the pin socket to allow the module to fully engage and "click home" in the Tx module bay.
Transmitter compatibility/suitability JR 347,388,3810, 783,U8, PCM10,PCM10S,PCM10SX,PCM10IIs,8103,9303,MX-22,MX-24s
Earlier and other non module style of transmitters will require the use of the LemonRx DIY module which needs to be wired in to the transmitter. See here for more details: Lemon Rx DSMP(SPEKTRUM DSMX/DSM2 COMPATIBLE) DIY MODULE FOR VINTAGE TRANSMITTER | eBay Graupner/JR MC18, MC20, MC24 with some adaption required for antenna positioning in Tx case.
Video of PLUG and GO module in operation: https://youtu.be/Nv1Ma6YhCMM
Condition is "New". UK STOCK and dispatched with Royal Mail 1st Class.
The range and reliability is equal to or better than other 2.4 GHz modules from ORX and FrSky that I have used in my transmitter conversions. It is further development using the latest Chipset for DSMX/DSM 2 (SPEKTRUM) protocols, no problems found losing the bind as can be found with other modules.
The photos above show the module in operation with a pair of vintage JR APEX transmitters from the 1980s which have now been brought back into regular use.
Other Lemon products for sale here : Lemonrxeurope on eBay FCC and CE compatible for legal RF transmission use throughout the world.
The Lemon Rx DSMP™ Plug and Go transmitter module is designed specifically for any JR module bay capable transmitter that supports PPM or 9XR-DSM protocol. Example of these transmitters are RadioMaster TX16s, TX12, FrSky Taranis Q X7 and Turnigy 9x just to name a few.
The revolutionary DSMP protocol based on software defined radio packet allows full compatibility to all Horizon Hobby's DSMX or DSM2 compatible receiver as well as the bind and ready to fly model aircraft without any channel rescaling configuration required except the first 4 channels' order (TAER or namely Throttle, Aileron, Elevator, Rudder) need to be mapped.
Telemetry display and alert is supported at either PPM / 9XR-DSM protocol if the transmitter uses the ErSky firmware downloadable at http://www.er9x.com/.
Transmitter setup - Set to use external module with PPM output, 10 channels, 20ms spacing - Set to use JR / Spektrum/ Taranis TAER (Throttle, Aileron, Elevator, Rudder) channel mapping order - Do not re-scale any channels unless necessary.
This Plug and Go module has an internal re-scaler to ensure proper operation of all Lemon Rx receivers, the popular HH DSMX compatible or DSM2 compatible aircraft
Telemetry display and alert setup (FrSky firmware only) - Find your radio firmware at http://www.er9x.com/ and update it -PPM / 9XR-DSM protocol can all be used for receiver operation. Set telemetry packet decoding to accept DSM telemetry packet. Binding to DSMP™, DSMX compatible or DSM2 compatible receiver / planes -
Press and hold the button on the module - Turn on the transmitter and ignore all the warning messages (if any) - Wait until the module turns on with red light on and green light flashing - Release button - Observe indication. Green light on means binding is completed.
Red light flashing indicates bind fails. Turn off the transmitter and resume the whole binding procedure if bind fails. Please note that when used in multi model memory transmitters, by using the same type of protocol receivers (DSM2 OR DSMX from any manufacturer) in all the models in the Tx memory, you will then avoid having to rebind the module to the receiver selected, if it is of a different protocol to the protocol that the module has already been bound with..
In short, install the same type of protocol Rx in all models in the Tx memory.
Range check During normal operation (green light on), press and hold the button puts the module in range check mode (red light on). Range check mode passes with valid control of the model from 30 meters away.
Release the button to allow full power transmission.
Note: 1) This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc.
2) This is not an underground black market fake Spektrum product. LemonRx quality is guaranteed.
3) Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spektrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).
Please scroll down for a pdf file of the user manual