Decal measures approximately 3" tall x 12" wide
Other sizes available Contact us for pricing
This is a High performance Outdoor grade die-cut pressure sensitive vinyl logo. There is no background
Any logo can be provided in your choice of COLORS.
Upon Checkout Press "Note to Seller" and add color choice.
Comes with transfer paper
Decals are great for windows, cars, home, books. laptops, walls or any smooth surface You name it!!
AUCTION IS FOR ONE Pair of LOGOS
DECALS ARE SENT USPS REGULAR MAIL. NO TRACKING #
If you incur any problems with delivery please message us first
We are a full service Sign manufacturing company and can provide Custom decals Too!
Check out our other auctions, we are constantly adding new items!
INSTALLATION INSTRUCTIONS
Step 1
Place the lettering on a clean, flat surface with the white wax paper backing facing you. Run a squeegee over the wax backing with even pressure to secure the lettering to the masking tape.
step 2
Using a tape measure, measure your surface area to find the center point or desired location for installation.
step 3
Place the lettering sheet against the surface, with the masking tape facing you and the backing still on. Place a strip of masking tape down the center (between the letters if possible). Secure with tape in all four corners.
step 4
Choose one side and remove the corner tape. Gently and slowly pull away the backing at a 45 angle to prevent stretching or tearing. Stop when you reach the center tape line. Have a second person hold the exposed film as you use the razor blade to remove the loose paper backing. Tip: If you do not have a razor blade, tear the top of the backing and pull it straight down, making as clean a tear as possible.
Step 5
Carefully place the exposed lettering against the surface and squeegee firmly in both vertical and horizontal directions, starting from the center and working outward. The squeegee should stay in direct contact with the surface of the vinyl as much as possible in order to prevent air bubbles.
Step 6
Once the first half is installed, remove all of the masking tape that you used to secure the material to the window. Lift the uninstalled material and slowly pull away the remaining backing at a 45 angle.
Step 7
Firmly apply the remaining lettering. Squeegee over the entire decal in both vertical and horizontal directions.
Step 8
When finished,very gently peel away the top layer of masking tape at a 45 angle. Caution: removing the masking tape too quickly can easily damage the material.
Most air bubbles can be pushed towards the edge and outwards. If any air bubbles remain, an Exact-o knife (or any object with a sharp point) can be used to gently punch a hole in the bubble to release
Full Cure time 4-8 days