eBay listing template designed by DSUTV

5/8 Left Thread Chromoly Heim Joint & Bung for 1.25" .095 Wall

SIngle Joint Rod End Kit - Fabricate Custom UTV Parts

Product Description

50 Caliber Racing Rod End Kit - Single Joint - 5/8-18 Chromoly Heim Joint w/ Bung for 1.25" OD x .095 x 1.06" ID Tube - Left Thread

Single joint rod end kit including a 5/8 x 5/8 heat treated heim joint, jam nut, and a steel weld in bung (tube adapter). Designed specifically for 1.25" OD .095 wall tubing with 1.06" ID, the bung will fit any steel tubing with a 1.06" inside diameter. All of our heims are made from 4130 chromoly steel, with a nylon / PTFE (teflon) liner. The load rating and size make these excellent for building custom sway bar links, tie rods, radius arms and more. Includes one heim joint and one bung.

This ad is for one (1) heim joint, lock nut and bung with left hand thread


Rod End Specs:

- 4130 Chromoly Steel, Nylon / PTFE (teflon) Liner
- Static radial load rating: 17,955 lb
- Thread pitch: 5/8" - 18 LH Thread
- Bore: 5/8"
- Ball end diameter: 1.5"
- Socket width: .562"
- Ball width: .75
- Overall length: 3.37"
- Center line length: 2.625"

5/8" Bung Specs:

- Fits Tube Size: 1.25" OD. x .095 Wall x 1.06" ID
- Thread: Female 5/8"-18 LH Thread
- Thread Length: Full length - 2.125"
- Overall Length: 2.125"
- Material: Steel
- Finish: Raw (no finish)

Perfect for fabricating custom off road parts for UTVs, ATVs, Sand Rails, Hot Rods, Race Cars, 4x4s, Jeeps, Rock Crawlers, and more!

- Radius rods
- Sway bar links
- Tie rods
- Drag links
- Control arms
- 4 Link setups
- Panhard bar / Trackbar
- Hi steer


For more Off Road parts, fabrication supplies, heim joints, rod end kits, split tube clamps and more, please visit our ebay store

50 Caliber Racing Rod End Kit

  • Single Joint Rod End Kit
  • Includes one heim joint, jam nut, and bung
  • Thread: 5/8"-18 Left Hand Thread
  • Fits Tube Size: 1.25" OD. x .095 Wall x 1.06" ID
  • Chromoly Heim Joints, 17955lb radial load
  • Brand New
  • Free shipping to the USA!
  • 6101A12-001
Free shipping to the lower 48 USA from our warehouse in Las Vegas, Nevada!     |     Most items ship within one business day     |     Fitment for most items are specific     |     ***Be sure to view the fitment list to verify that it fits your vehicle!***     |     Tap "See full description" below for more details..

50 Caliber Racing Rod End Kit - Single Joint - 5/8-18 Chromoly Heim Joint, jam nut and Bung for 1.25 inch OD .095 wall Tube - 6101A12
Perfect for fabricating custom off road parts for UTVs, ATVs, Sand Rails, Hot Rods, Race Cars, 4x4s, Jeeps, Rock Crawlers, and more!
- Radius rods
- Sway bar links
- Tie rods
- Drag links
- Control arms
- 4 Link setups
- Panhard bar / Trackbar
- Hi steer 
Payment, Shipping, and Returns
Payment:
- We accept Paypal, credit card and E-check payments. Immediate payment is required for this item.


Shipping:
- We offer Free Shipping to the Lower 48 States (some restrictions may apply) from our warehouse in Las Vegas, Nevada
- We use USPS and Fedex for all domestic orders. We are unable to guarantee a specific carrier.
- Most domestic orders ship within 1 business day and arrive in 3-5 days.
- We do ship worldwide, see the shipping tab for rates. Delivery typically takes 7-14 days depending on location.

Returns:
- Free 30-day returns on unused items. Refund or exchange available.
- Items must be in like-new, unused condition to qualify.
- If your order arrives damaged or with an issue, photos are required.
- See the "Shipping and Payments" tab above for full policy details.

About us:
We are a family run business, offering high quality ATV, UTV and Pit Bike products online for over 20 years. We stock a huge selection of the best parts and accessories to fit popular UTVs from Polaris, Kawasaki, Can-Am, Yamaha, Honda and more. Many of the items we carry are made right here in the USA. New products every day, so check back often!