Product Knowledge
Excellent Service
Fast Shipping
3.3v-12v Control PnP Mosfet Module 5v-36v Arduino / Raspberry Pi
3.3 - 12v Control Signal PnP Mosfet Module 5v - 36v Load
Input control voltage: 3.3V-12V
Output charged voltage: 5V - 36V
Board uses opto isolated, completely separated from the 2-terminal voltage.
Input is controlled by a 2 pin control ,a ground control can be directly connected to the control switch.
Control current 1-5mA control voltage is different, the current difference is mainly the loss on the LED.
If load exceeds 5A a heat sink will need to be added Maximum 22Amp (Use pwm as part of your thermal control for this module).
Board with LED lights
Host input and output screw terminal block
Control terminal using 2.54mm pin, easy wiring.
Control can be directly connected microcontroller IO. MCU can for ARDUINO PWM control motor speed,
the brightness of lights and so on. 
Note that large current need to add additional heat sink
Board size: 4.2 X 2.6 cm

Please Note: Sometimes this product comes from different suppliers and may not be exact to what is pictured here, however all the parameters, values and connections are the same. 

          Payment

          Postage

​​​​​​​Please pay as soon as possible, as that will allow us to post your item to you sooner!


Express Post is available for an additional $14.95 however it's recommended to take advantage of the free express post offer. 

We offer FREE postage on this product!


Your order will be sent same day or within 1 working day of receiving payment (Monday-Friday) and you should expect to receive approx 5 days after dispatch.


In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

All prices include GST and every purchase comes with a tax invoice!

FREE Express Post for Orders over $100

​​​​​​​We've all experienced the long waits for our parcels lately with Australia Post's increased workload and restrictions.  If your order is $100 or more then we'll just give you express post automatically for no extra cost. 

          Returns

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.


You can return a product for up to 30 days from the date you purchased it.


Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

Based in Melbourne
Awesome Feedback
Value for Money
3.3 - 12v Control Signal PnP Mosfet Module 5v - 36v Load Input control voltage: 3.3V-12V Output charged voltage: 5V - 36V Board uses opto isolated, completely separated from the 2-terminal voltage. Input is controlled by a 2 pin control ,a ground control can be directly connected to the control switch. Control current 1-5mA control voltage is different, the current difference is mainly the loss on the LED. If load exceeds 5A a heat sink will need to be added Maximum 22Amp (Use pwm as part of your thermal control for this module). Board with LED lights Host input and output screw terminal block Control terminal using 2.54mm pin, easy wiring. Control can be directly connected microcontroller IO. MCU can for ARDUINO PWM control motor speed, the brightness of lights and so on. Note that large current need to add additional heat sink Board size: 4.2 X 2.6 cm All prices include GST and every purchase comes with a tax invoice
Excellent Service
Fast Shipping
3.3 - 12v Control Signal PnP Mosfet Module 5v - 36v Load
Input control voltage: 3.3V-12V
Output charged voltage: 5V - 36V
Board uses opto isolated, completely separated from the 2-terminal voltage.
Input is controlled by a 2 pin control ,a ground control can be directly connected to the control switch.
Control current 1-5mA control voltage is different, the current difference is mainly the loss on the LED.
If load exceeds 5A a heat sink will need to be added Maximum 22Amp (Use pwm as part of your thermal control for this module).
Board with LED lights
Host input and output screw terminal block
Control terminal using 2.54mm pin, easy wiring.
Control can be directly connected microcontroller IO. MCU can for ARDUINO PWM control motor speed,
the brightness of lights and so on. 
Note that large current need to add additional heat sink
Board size: 4.2 X 2.6 cm
All prices include GST and every purchase comes with a tax invoice

          Payment

3.3v-12v Control PnP Mosfet Module 5v-36v Arduino / Raspberry Pi

​​​​​​​Please pay as soon as possible, as that will allow us to post your item to you sooner!


Express Post is available for an additional $14.95 however it's recommended to take advantage of the free express post offer. 

All prices include GST and every purchase comes with a tax invoice!

          Postage

We offer FREE postage on this product!


Your order will be sent same day or within 1 working day of receiving payment (Monday-Friday) and you should expect to receive approx 5 days after dispatch.


In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

FREE Express Post for Orders over $50

​​​​​​​We've all experienced the long waits for our parcels lately with Australia Post's increased workload and restrictions.  If your order is $50 or more then we'll just give you express post automatically for no extra cost. 

          Returns

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.


You can return a product for up to 30 days from the date you purchased it.


Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

Based in Melbourne
Awesome Feedback
Value for Money