This kit is to fit Turbo oil Line/Fitting for 1JZ/2JZ Twin Turbo to
Single Turbo .
Factory 1JZ or 2JZ-GTE is twin turbo, Many 1JZ or 2JZ-GTE Single
Turbo Need to change the oil line setup and this kit is
exactly what it is needed for Single turbo application.
Item Includes:
1x
AN10 Aluminum Oil drain return Flange that
bolts to the Block
1x AN10 Aluminum Oil drain return Flange
that bolts to Turbo ( 2-Hole-Centerline
Distance=51mm or 2") works for many turbos.
1x AN4 Aluminum Oil feed Flange (with Oil
Restrictor Built in) that bolts to the Turbo
(2-Hole-Centerline Distance=38mm or 1.5")
works for many turbos.
1x AN4 Aluminum Oil Feed Flange that bolts
to the Block
(one of the 2 Factory Twin Turbo oil feeds,
supplys oil to Turbo)
1x Cap Bolt that bolts to the Block
(seals one of the 2 Factory Twin Turbo oil
feeds)
1x AN10 Braided Oil drain return Line
1x AN4 Braided Oil Feed Line. Female AN4 on
both ends. with 90 Degree Elbow Connector
1 x AN10 Straight Fitting
1 x AN10 90 Degree Fitting
Shipping cost outside US
continental States is Higher, Please Refer to the following Table for Extra
Costs.
