The Segmented Temperature Controlled Burnout Furnace is engineered for professional jewelers and small workshops. It offers precise segmented temperature programs via a PID digital controller, efficient wax drainage and exhaust, and a high-temperature resistant lining for fast heating and stable insulation. Compact, energy-efficient, and ideal for wax burnout and mold preparation.

Key Features

Preset Heating Program (Factory Default)

Stage Ramp / Target °C Hold Time
1 Ramp to 180 °C Hold 90 min
2 Ramp to 350 °C Hold 90 min
3 Ramp to 580 °C Hold 120 min
4 Ramp to 900 °C Hold 120 min
5 Cool to 780 °C Ready for inverted casting

Specifications

Voltage 110V/120V
Power 1500W
Maximum Temperature 800 °C (1472 °F)
Oven Chamber Internal Dimensions Approx. 15×15×20cm (5.9×5.9×7.9 in)
Overall Dimensions Approx. 33×34×40cm (13×13.4×15.8)
Weight Approx. 15.2kg (33.4lbs)
Heating Method Resistance Wire

What’s in the Box

Operation & Safety Notes

  1. Read the instruction manual before first use.
  2. Use in a well-ventilated area and keep away from flammable materials.
  3. Place the furnace on a stable, heat-resistant surface.
  4. Do not touch hot surfaces — use included tongs and gloves.
  5. Allow the furnace to cool below 100 °C (212 °F) before opening the chamber.
  6. Only process recommended materials (wax, plaster molds, non-ferrous casting preparations). Do not melt plastics or hazardous materials.
  7. Do not overfill flasks — do not exceed recommended flask sizes.
  8. Keep out of reach of children and pets.

Important Purchase Notes

The furnace contains high-temperature insulating materials — slight surface imperfections or small insulation cracks are normal and do not affect performance. If you are sensitive to cosmetic differences, please consider before purchase. For questions, contact our support team via eBay message.

 

PushAuction