Zombie Components LLC |
www.zombiecomponents.com |
Benning 550703.03 input output card, removed from a Benning inverter system. Green printed circuit
assembly mounted in an orange DIN rail carrier housing. Signal interface is a 16 position pluggable screw
terminal strip along one long edge, numbered 1 through 16, and a 10 position pluggable screw terminal strip
along the other, marked 1.1, 1.2, 2, 3, 4, 5, 6, 7, 8 and 9. Two shielded RJ45 jacks sit on the board edge
next to the 10 position strip. A 6 pin wire to board header and a small 2 pole connector are also fitted.
The PCB label reads 550703.03 and carries the lead free symbol. A label on the hybrid module pair reads
esw606446.1 219Ai152i. An ESD caution label is applied beside it. Every marking described here is shown in
the photos. Four units available, sold individually.
60 Day Money Back Guarantee.
| Parameter | Value |
| MPN | 550703.03 |
| Brand | Benning |
| Type | input output card (Ein-Ausgabekarte), the description carried in Benning distributor catalogs for part 550703, listed as a spare for Benning industrial power supply systems including the TEBECHOP rectifier and INVERTRONIC inverter families |
| Secondary marking | esw606446.1 219Ai152i |
| Upper terminal strip | 16 positions, numbered 1 through 16, pluggable screw type |
| Lower terminal strip | 10 positions, marked 1.1, 1.2, 2, 3, 4, 5, 6, 7, 8, 9, pluggable screw type |
| Data ports | two shielded RJ45 jacks |
| Additional connectors | one 6 pin wire to board header, one 2 pole board edge connector |
| Carrier | orange plastic DIN rail housing with four corner mounting holes Assembly is lead free marked |
| Item size | 6 by 5.4 in |
| Item weight | 1 lb |
One Benning 550703.03 input output card in its orange DIN rail carrier housing. Both pluggable screw terminal strips, the 16 position and the 10 position, fitted as pictured. Wire pigtail: 12 white conductors with red crimp ferrules landed in 12 of the 16 upper terminal positions, free ends cut and stripped. The ferrules pull out of the pluggable strip if you want bare terminals.
Not included:
RJ45 patch cables.
DIN rail.
Host controller, inverter, rectifier or any other system hardware.
Documentation, drawings, firmware or software.
Mounting hardware.
Sold as a replacement or spare board for Benning power supply systems. Benning does not publish a public
datasheet or pinout for this card, so terminal functions and ratings are not stated here. Confirm the
03 revision and the esw606446.1 label against the board in your system before ordering. Close
photographs of both markings are part of this listing for that purpose.
Where possible, electronics are tested. The value of an item determines the effort put into testing; items not specifically tested in detail are visually inspected and reviewed for operational status. Any exceptional wear is noted in the description. Most items are covered by a money-back guarantee.
Boxed at 10 by 9.4 by 6 in, shipping weight 2 lb, item plus packing. Ships from Sylmar, California.
Orders may take up to 3 business days to ship from payment; weekends are not counted. If you need faster service, contact us before ordering so we can adjust priorities. We reserve the right to change the selected shipping method to an equivalent or better service that fits the item.
We ship worldwide. USPS may not be an acceptable choice for international shipping due to size, weight, and export documentation restrictions; you may be asked to select FedEx, UPS, or DHL at a higher price. Confirm your shipping choice with us before ordering if in doubt.
International shipments may be delayed or cancelled due to EAR and ITAR export compliance requirements. The vast majority of our items need no export license and ship under EAR99 and other exemptions; items that require a license are indicated in the listing.
This listing carries a 60 day money back guarantee: return your purchase for any reason within 60 days for a full refund or exchange. Returned items must be in the condition received and in the original packaging.
All items are guaranteed to be as described. Any item not as described can be returned at our expense for a full refund, regardless of any as-is marking.
If you are dissatisfied for any reason, contact us first and give us a chance to work things out; if we cannot fix it, you receive 100% of your purchase price back.
We do not keep or share your information anywhere. Your information resides only on eBay and is available to us only for a limited time while we interact with you on an inquiry, order, or return, per eBay usage policies.