Motor Rotor & O-Ring Set for Fisher & Paykel DD60SDFTX9 (81214-B) Tall Single DishDrawer Dishwasher. Match both the model number and product code on the appliance label before ordering.

This listing is intentionally limited to the exact appliance identity below.

Also known as: AU-2EIZGCCY4I

Big Oz Lebowski

The supplied set is the removable wet-side motor rotor assembly and O-ring. It works inside the separate motor housing and stator.

The upper impeller helps circulate wash water and drive spray-arm movement. When the motor runs in the drain direction, the lower five-blade impeller helps pump water out. A damaged or restricted rotor can therefore affect washing, spray-arm movement or draining.

Those symptoms do not prove the rotor is faulty. Blockages, broken glass or debris, the drain path, motor housing, stator, wiring or controller can cause similar trouble.

F24: may point to a motor stalled, stopped or overload condition. This rotor may be relevant when the existing rotor is jammed, damaged or worn, but the code is not proof by itself.

A3 or A6: the rotor can be part of the diagnostic check for selected drain or spray-arm faults when damage, obstruction or incorrect installation has been confirmed.

F25: may involve rotor installation, the stator, wiring or motor controller. Diagnosis is required.

This single-drawer model uses one rotor system. This listing supplies one rotor and O-ring set.

Find the model and product code on the front chassis trim. Match DD60SDFTX9 and 81214-B. Do not rely only on the DD60 family name, the colour of the old rotor or a similar photo.

Compare the supplied photographs with the rotor removed from your machine. Confirm the impeller arrangement, locating points and O-ring before installation.

Disconnect the DishDrawer from power. Remove the rack and spray arm, then inspect the rotor cavity and drain path for food debris, seeds, broken glass or other foreign material. Debris left in the housing can damage the replacement rotor.

Seat the O-ring correctly, align the rotor and housing marks and lock the rotor clockwise. Refit the spray arm and confirm that it rotates freely. The old rotor can be tight. Use a qualified appliance technician if you are not comfortable with the repair.

If the exact model and product code above are on your appliance and the supplied set does not fit, send me a clear photo of the appliance label and attempted fitment so I can arrange a prompt refund.

I specialise in DishDrawer parts and stock a growing range of commonly needed replacement components. If you are unsure which part suits your machine, send me a clear photo of the model and product number label before ordering.

Aftermarket replacement part. Fisher & Paykel, DishDrawer, model numbers and part references are used only to identify fitment and compatibility. This product is not manufactured or endorsed by Fisher & Paykel.