For BMW X3 F25 X4 F26 ID5 ID6 EVO CID NAVI Displa Radio Screen 6822625
Fitting the following BMW models:
Packaging include:
1x display
Note: match the part number before order, if you are not sure, send your VIN, we will check it.
Q & A:
To replace a BMW X3 F25 screen, you must carefully remove the front vent and then the bolts securing the screen. After disconnecting the original screen's harness, install the new one, ensuring you correctly attach the cables, including any fiber optic connections. To resolve a "no signal" issue, try rebooting the iDrive system by holding the volume button for about 30 seconds, check for loose LVDS (video) cables, and verify that the correct CAN protocol is selected in the screen's settings.
How to Resolve a "No Signal" Issue
Reboot the iDrive System:
Press and hold the volume button on the center console for approximately 30 seconds until the screen goes black. Release the button and wait for the iDrive system to reboot.
Check the Video Cable (LVDS):
The LVDS (Low Voltage Differential Signaling) cable connects the head unit to the screen. Ensure this cable is securely plugged into both the screen and the head unit.
Verify CAN Protocol Settings:
After installation, the new screen may need the correct CAN protocol set. Access the screen's factory settings (often by inputting a code like "2018") and select the correct protocol option for your iDrive system to resolve the "no signal" issue.
Check Fuses:
A blown fuse can cause a lack of power to the system. Locate the fuse boxes and check the appropriate fuses for the radio/iDrive system.
Important Considerations:
Compatibility:
Ensure the replacement screen is compatible with your specific F25 model, as screens from the same year can differ.
Fiber Optic:
If your vehicle has an original optical fiber system, ensure the new harness has the connections to integrate with it.