Door Seal for Bosch

Replacement door seal for selected Bosch/Siemens front load washing machine models. Source fitment covers selected Series 4, Series 6, Series 8, Logixx 8, EcoSilence Drive/WAT, WAY and Siemens iQ family model codes, including many 7kg and 8kg machines plus selected 9kg models.

Made in Turkey by a specialist gasket factory that also produces OEM gasket work for European appliance companies. This item is sold here as an aftermarket replacement; Bosch and Siemens names and part numbers are used only to identify fitment.

Use this part when your appliance model and old part match the part references shown here. Always compare the removed part with the listing photos before ordering.

Check the seal shape, corner profile, fixing points, and approximate size front inside diameter 29cm; front outside diameter 33.5cm; back outside diameter 41cm. Similar appliance models can use different parts.

Also known as: AU-VT47WFE3XU

00680768, 00680769, 00772653, 00682843, 00772658, 20007273, 772658, BO371

This part may be referred to as a door seal, gasket, boot seal, bellow, or rubber seal.

Big Oz Lebowski

Compatible brand: Bosch
Part reference: 00680768
Replaces: 00680768, 00680769, 00772653, 00682843, 00772658, 20007273, 772658, BO371
Approximate size: front inside diameter 29cm; front outside diameter 33.5cm; back outside diameter 41cm
Features: 1 open tube, without lighting nozzle, suds-resistant, light grey, 8 kg models, EPDM rubber
Included: 1 x washing machine door seal only
Clamps and wires are not supplied
Made in Turkey
Supplied clear-wrapped and boxed for delivery

Washer door seals can lose their shape if crushed in transit. We keep this seal clear-wrapped and boxed so the rubber lip, groove and round profile arrive intact and easier to compare with your old seal before fitting.

A torn, split, or perished door seal can allow water to leak from the front of the machine.
Replacement is commonly considered when the old rubber is damaged, loose, heavily stained, or no longer sealing against the door glass.
Check the seal seating lip, drain holes, inlet ports, and door-glass contact area before ordering. Clamps and wires are not supplied, so reuse the correct existing retaining parts from your appliance if required.

Capacity and series wording is a search guide only. Compatible model evidence includes selected Bosch/Siemens Series 4, Series 6, Series 8, Logixx 8, EcoSilence Drive/WAT, WAY and Siemens iQ front loaders, including 7kg, 8kg and selected 9kg model codes. Always match the full model/E-Nr and old seal shape before ordering.

Known compatible model references for this part are listed below. Model labels can include spaces, slashes, brackets, and extra suffixes, so compare the full appliance label before ordering.

WM16S741AU/13, WAS28440AU/55, WAS32741AU/10, WAS32741AU/16
WAS32741AU/18, WAS32741AU/12, WAS32742AU/10, WAS32741AU/14
WAK24160AU/04, WAS32440AU/45, WAK24160AU/01, WM16S741AU/07
WAK24220AU/03, WAK24220AU/02, WM16S741AU/01, WAS32741AU/20
WAT28620AU/72, WAK24162AU/03, WAS32741AU/05, WAS32741AU/27
WAK24161AU/03, WAT24261AU/04, WAS32741AU/07, WAS32741AU/08
WAT24261AU/02, WAS32741AU/23, WAT24261AU/01, WAS32741AU/24
WM16S741AU/10, WAS32741AU/09, WAS32440AU/10, WAS32440AU/55
WAW28420AU/20, WGA244U0AU/01, WAW28440AU/23, WAS28440AU/50
WAS28440AU/27, WAP24160AU, WAK24160AU, WAK24220AU
WM14S440AU/16, WM14S440AU/17, WM14S440AU/18, WM14S440AU/20
WM14S440AU/23, WM16S740AU/18, WM16S740AU/20, WM16S740AU/23
WM16S740AU/27, WAS32440AU, WAS32742AU/01, WAS32742AU/06
WAS32742AU/08, WAS28440AU/16, WAS28440AU/17, WAS28440AU/18
WAS28440AU/20, WAS28440AU/23, WAS28461AU/01, WAS28440AU/24
WAT28440AU/04, WAT24220AU/01, WAP24160AU/02, WAP24160AU/01
WAS24460AU/03, WGA244U0AU

If unsure, send your full appliance model number and photos of the removed part before ordering. This helps avoid wrong-fit purchases.

If your appliance model is listed in the title or compatibility section and this part does not fit, send a clear photo of the appliance model plate and the attempted fitment. We will arrange a prompt refund.

Match part number 00680768 against your old part before ordering. Compare the old part measurements with front inside diameter 29cm; front outside diameter 33.5cm; back outside diameter 41cm. Check the model code on the appliance rating label. If unsure, send photos of the old part and model label before ordering.

Disconnect power before fitting. Remove the old seal, clean the seating area, and make sure the replacement is seated evenly before using the appliance. Use a qualified technician if unsure.

This is an aftermarket replacement part. Bosch and Siemens names and part numbers are used only to identify fitment and compatibility.