Elcometer 355 Ferrous Coating Thickness Gauge w/ Probe, Case, Calibration Foils & Accessories

Description:

Complete Elcometer 355 coating thickness gauge setup, acquired as a full kit from a metrology department.

Powers on and produces readings when tested against ferrous (steel/magnetic) surfaces; no reading produced on non-ferrous test surfaces (aluminum, tin, stainless), consistent with a ferrous-type probe. Accuracy not verified — calibration is expired (see below).

What's included:

• Elcometer 355 ferrous coating thickness gauge (digital display, BASE/CAL/LIMIT/BATCH functions, mean & std. deviation modes)
• Ferrous probe with cable
• Probe alignment fixture for round/curved surfaces (probe-sized through-bore)
• Set of 6 Elcometer certified calibration foils (23.6 - 1037 micron) with traceable tracking numbers
• 50µm coated reference standard + additional reference plate
• DB25 PC interface adapter
• (2) Communication adapter nuts? Blue bag
• Original manual
• Spare keyboard protector covers (unused)
• Stereo earplugs
• Original hard carrying case with custom foam

Good to know:

• Probe produced readings on ferrous/magnetic test surfaces and no reading on non-ferrous surfaces, consistent with ferrous-type operation — actual measurement accuracy not verified
• Prior calibration label shows last cal 02/14/2023 (expired) — recommend recalibration for formal QA use
• Sold as a complete lot, as acquired — some included items may be general-purpose lab accessories rather than gauge-specific. Stereo earplugs

Great option for inspectors, fabricators, or QA labs needing a ferrous DFT gauge with calibration reference materials included.

As pictured