【ABS Diagnosis】By accessing to ABS system to view its Live Data Stream, and retrieving the fault codes, this scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off.

【SRS Diagnosis】By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag.

【ECM Diagnosis】You can diagnose the engine system via ecu obd2 port, support all 10 OBDII test modes, such as live data, O2 sensor test, component test and more;read and clear the engine error codes, find out the exactly problem, repair it, and turn off the MIL engine light.

【TCM Diagnosis】AT is a set of transmission used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine.MUCAR CS4 obd2 scanner can read/clear codes and view live data retrieve the error information from AT.

15 Maintenance Service Functions Lifetime Free Update
1) Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.

2) ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

3) EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.

4) DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5) BMS Reset
The monitoring unit of the car battery after replacing the battery or battery monitoring sensors.

6) Injector Coding
Write the actual code of the fuel injection nozzle or rewrite the code in the ECU to the code corresponding to the fuel nozzle of each cylinder after replacing the ECU and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder.

7) Oil Reset
Reset the oil life system and turn off the oil light after oil or oil filter replacements.

8) SAS Calibration
Calibrate the steering angle after replacing steering-related parts.

9) Gearbox Reset
Help complete the gearbox self-learning to improve gear shifting quality.

10) TPMS Reset
The tire pressure and turn off the tire pressure fault indicator.

11) IMMO Keys
Disable the lost vehicle keys and program the replacement key fob. ONLY For some Asian and American cars with low-grade IMMO.

12) ETS Reset
Need to perform throttle matching: Replace the electronic control unit, power off the electronic control unit, replace the electronic throttle assembly, replace or disassemble the intake port, clean the throttle.

13) Adblue Reset(Diesel Engine Exhaust Gas Filter)

Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

14) EGR Adaption

Learn the Exhaust Gas Recirculation valve after being cleaned.

15) A/F Reset

Set or learn Air/Fuel ratio parameters.

FULL 10 MODE OBDII CAR DIAGNOSTIC FUNCTIONS

1)Read Codes:Read extensive current, pending and permanent codes in OBD system quickly

2)Clean Codes:Clear detected fault codes and turn off the Check Engine Light efficiently

3)Live Date:View graphical live data of vehicle's computer module(s) for easy analyses

4)Freeze Frame:View the vehicle's operating parameters at the moment a DTC is detected

5)I/M readiness:Read I/M readiness status to have a vehicle inspected for state emissions compliance

6)O2 sensor test:Perform O2 sensor test to check fuel efficiency and vehicle emissions

7)On-Borad Monitor Test:Read the results of on-board diagnostic monitoring tests for specific components/systems

8)Car Information Display:Retrieve the vehicle information of VIN, CINs, and CVNs completely

9)EVAP Test:Perform the component Test by allowing initiating a leak test for the vehicle's EVAP system

10)DTC lookup:Every code in MUCAR 632 comes with a desc

Packing List

1PC MUCAR 632 OBD2 Scanner
1PC Cable
1PC User Manual