Features:

1: The capacitor ESR tester can accurately measure the ESR and DCR of the capacitor.

2: The DCR ESR tester can measure at different frequencies, ranging from 100KHz.

3: The ESR DCR capacitor tester has a user-friendly interface and control system, which is simple and convenient to operate.

4: The online capacitance meter test provides reliable and consistent measurement results, accurate analysis of capacitor performance.

5: The online test capacitance meter provides additional functions such as capacitance measurement and temperature compensation, which enhances its versatility in meeting various testing needs.

Specifications:

Part Name: ESR Tester

Size:125.00x80.00x32.00mm/4.92x3.15x1.26in

Color: White

Material: ABS

Dimensions: 125.00x80.00x32.00mm/4.92x3.15x1.26in

1. The measurement range is 0-25Ω, divided into 0-5Ω and 5-25Ω, and automatically switched.

2. Resolution: 0-5Ω is 0.01Ω, 5-25Ω is 0.1Ω.

3. Measurement accuracy: 0-5Ω range ±1.5%±0.01Ω, 5-25Ω range ±1.5%±0.1Ω.

4. ESR and DCR (DC resistance) of electrolytic capacitors can be measured, switched by ON/OFF/ for ZERO button.

5. The circuit is short-circuited by synchronous detection, the detected value is the ESR.

6. It can be measured online and offline, with a measurement current of 5mA and a measurement for frequency of 100kHz, the industry standard ESR measurement for frequency.

7. Automatic for zero adjustment when powered on, and automatic for zero adjustment when ESR and DCR change. The LCD screen displays the ESR value and offset value of the probe at the same time, which is convenient for users to adjust the for zero point in time to for ensure the highest accuracy.

8. The input end has overvoltage for protection.

9. Manual and automatic shutdown functions. Automatic shutdown is a smart way. If it is not used for about 5 minutes, it will automatically shut down.

10. When the power supply voltage is too low, the LCD screen will warn and automatically shut down after 10 seconds.

11. Use 3.7V / / rechargeable , which can be used while charging. The charging power supply is No. 2, and there is a charging indicator on the left, which is red when charging and green when charging is completed. The charging time is 2-3 hours.

12. The maximum working current of the whole machine is about 60mA (3.7V).

Package Contents:

1 x Tester

2 x Test Pens

2 x Test Clips

1 x USB Cable

Note:

Due to different monitors and lighting effects, the actual color of the item may be slightly different from the color shown on the picture. Thank you!

Due to manual measurement, please allow 1-2 cm measurement deviation.

We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.