EASYGUARD Plug Play Remote Starter fit for selected Toyota Reiz 10-18, sienna 11-21, Prado 10-17, 4 runner 10-17 & Lexus RX350 RX450H 10-15/GX460 10-17 with Factory OEM push start button Automation transmission LHD Car
Compatible vehicle
Don’t work with Key Start Vehicle, fit for push start button car only
Don’t work with hybrid, fit for Gas/diesel car only
Don’t work with manual transmission, fit for automation Transmission Only,
Don’t work with RHD (right hand drive) vehicles, fit for LHD (Left hand drive) vehicles only
Main function：
3X Lock Remote Start/stop
Note: There is no remote in this kit, use factory original remote/key fobs to remote start/stop. Remote start method: Continue to press original remote lock button 3 times will remote start/stop the car.
Open Door to Shut down
After remote start the car, when you open the driver door, the car Engine Will Shut Down for Safety consideration.
No need to change car remote, use factory original remote
Plug and play installation & no damage on car circuit
Wiring method
Programming method
Programming Procedure:
Once finished installation, you need to do a new programming.
Before programming, please be sure the ignition is turn OFF.
Step 1: Plug all the connectors with the Control Module,
Step 2: Don’t step on foot brake pedal. Press the push start button twice to turn Ignition On.
Step 3: The LED will turn to red, then turn off, wait for around 5 seconds, then turn to green and turn off.
Step 4: Press push start button once to shut down the vehicle.
Programming finished.
If the programming procedure is abnormal, please program again or reset it first then program till you program it success.
Note: Between each step, the LED indicator on control module will turn to pure red, which is default setting.