Description
WiFi Version Uconsole Clockwork Development Board with 74-Key QWERTY Backlit Keyboard (without CM4 Core Board)
Description:
- CPI V3.14 features a compact design with dimensions reduced to 95x77mm.
- Support reliable and complete lithium battery charge and discharge management
- Integrated 5G-WIFI (802.11ac) + Bluetooth 5.0
- High gain antenna
- 1 standard USB 2.0 port, 2 internal USB 2.0 connectors, 1 internal contact connector for keyboard module
- USB-C charging port
- TF card (Micro SD card) slot
- 40Pin MIPI screen interface
- Micro HDMI-compatible interface
- 3.5 headphone jack, supports microphone input
- Onboard stereo audio amplifier chip
- 40-pin GPIO expansion interface (using standard 0.5mm FPC connector)
- 52-pin expansion module interface (using standard Mini PCIE connector) for "EXT. module"
- Standard DDR2-SODIMM 200 Pins Interface: Connect CPI v3.14 to "Core Module"
Features:
- Up to 12 interfaces are integrated to ensure adequate connectivity for work and entertainment. Following the easy-to-upgrade modular design of CPU and memory, you can freely choose the appropriate "core" for various application scenarios.
- Compatible with the Raspberry Pi CM3 and CM4 series (with adapter board), meaning work done on the Raspberry Pi can be "transported" to the Fantasy Console in seconds.
- The 1280x720 resolution and 5-inch display area ensure visibility while providing good software adaptability and portability. For most applications, desktop environments and game emulators will run smoothly.
- Introducing an ultra-portable QWERTY keyboard with 74 keys and adjustable backlight. The trackball is a physical mini trackball with OK function and two mouse buttons, designed with four Hall Effect sensors for high sensitivity and reliability. Includes a set of retro-style gamepad arrow keys and four game buttons; these eight keys all adopt independent IO design to ensure minimal response delay.
- The keyboard central control unit adopts for Arm® Cortex-M3 architecture and is fully compatible with the Ar-duino STM32 development environment. Micro USB-UART programming port allows you to easily reprogram and customize keyboard firmware.
- The USB POGO Pin on the back of the keyboard is naturally connected to the motherboard, eliminating the need for cumbersome cable connection operations.
- The battery holder is carefully designed to make it more compatible with various 18650 battery sizes: diameter Ø18±0.5mm, length 65-69mm. The battery module has "short circuit and reverse polarity protection" function.
- Theoretically, you could use a single 18650 battery to power the system, or replace the batteries one by one as you use the system. (Note: The battery is not included.)
Package Included:
- 1 x Uconsole Clockwork Development Board
Description:
- CPI V3.14 features a compact design with dimensions reduced to 95x77mm.
- Support reliable and complete lithium battery charge and discharge management
- Integrated 5G-WIFI (802.11ac) + Bluetooth 5.0
- High gain antenna
- 1 standard USB 2.0 port, 2 internal USB 2.0 connectors, 1 internal contact connector for keyboard module
- USB-C charging port
- TF card (Micro SD card) slot
- 40Pin MIPI screen interface
- Micro HDMI-compatible interface
- 3.5 headphone jack, supports microphone input
- Onboard stereo audio amplifier chip
- 40-pin GPIO expansion interface (using standard 0.5mm FPC connector)
- 52-pin expansion module interface (using standard Mini PCIE connector) for "EXT. module"
- Standard DDR2-SODIMM 200 Pins Interface: Connect CPI v3.14 to "Core Module"
Features:
- Up to 12 interfaces are integrated to ensure adequate connectivity for work and entertainment. Following the easy-to-upgrade modular design of CPU and memory, you can freely choose the appropriate "core" for various application scenarios.
- Compatible with the Raspberry Pi CM3 and CM4 series (with adapter board), meaning work done on the Raspberry Pi can be "transported" to the Fantasy Console in seconds.
- The 1280x720 resolution and 5-inch display area ensure visibility while providing good software adaptability and portability. For most applications, desktop environments and game emulators will run smoothly.
- Introducing an ultra-portable QWERTY keyboard with 74 keys and adjustable backlight. The trackball is a physical mini trackball with OK function and two mouse buttons, designed with four Hall Effect sensors for high sensitivity and reliability. Includes a set of retro-style gamepad arrow keys and four game buttons; these eight keys all adopt independent IO design to ensure minimal response delay.
- The keyboard central control unit adopts for Arm® Cortex-M3 architecture and is fully compatible with the Ar-duino STM32 development environment. Micro USB-UART programming port allows you to easily reprogram and customize keyboard firmware.
- The USB POGO Pin on the back of the keyboard is naturally connected to the motherboard, eliminating the need for cumbersome cable connection operations.
- The battery holder is carefully designed to make it more compatible with various 18650 battery sizes: diameter Ø18±0.5mm, length 65-69mm. The battery module has "short circuit and reverse polarity protection" function.
- Theoretically, you could use a single 18650 battery to power the system, or replace the batteries one by one as you use the system. (Note: The battery is not included.)
Package Included:
- 1 x Uconsole Clockwork Development Board
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Apr 24, 2026 at 21:59:16 PDT, seller added the following information: