Gibson Elvis SJ-200 2022 acoustic guitar

Description

[Elvis SJ-200]

This signature model brings to life the legendary SJ-200, beloved by the "King of Rock 'n' Roll," Elvis Presley.

Based on the original SJ-200 given to Elvis at RCA Studio B in Nashville in the mid-1960s, this exceptional guitar is a testament to Gibson's tradition and Elvis' legacy.

The impressive body size of a Super Jumbo guitar combines a Sitka spruce top with maple back and sides. Combining rich, deep bass and vibrant, powerful highs, this guitar delivers a powerful resonance with both strumming and fingering.

The fingerboard features a mother-of-pearl crown inlay, the SJ-200's traditional Moustache bridge, and gold hardware. The truss rod cover is engraved with "Elvis," creating a truly captivating look.

It also features an LR Baggs VTC pickup, making it immediately suitable for live performances and recording. Its practicality, which allows it to output the nuances of the acoustic sound as they are, is also an appealing feature.

Get the legendary sound and presence in your hands.

[Product Condition]
- No visible bracing peeling
- No visible bulging of the top
- No visible neck flex, in good condition
- Minor scuffs on the frets, but no impact on playability
- Approximately 80% of the frets remain
- When the neck is set straight on the 1st string, there is a slight tendency for the 6th string to bow forward
- The truss rod has some room to tighten, but the 6th string is slightly weak
- String height (above the 12th fret)
- 6th string: Approximately 3.3mm
- 1st string: Approximately 2.4mm
*Measurements as of the time of publication

This guitar was manufactured in 2022, so there are some minor scratches and tarnish on the gold parts due to age, but there are no major dents or noticeable scratches, and it is in very good condition.

Specifications
Body
Top: Sitka Spruce
Back: Maple
Sides: Maple
Bracing: Scalloped X Bracing
Finish: Gloss Nitrocellulose Lacquer

Neck
Neck: 2-Piece Maple
Scale Length: 25.5" (647.7mm)
Fingerboard: Indian Rosewood
Fingerboard Radius: 12"
Nut: Bone
Nut Width: 1.73" (43.815mm)

Hardware
Pegs: Gold
Bridge: SJ-200 Rosewood Moustache Bridge with Mother-of-Pearl Hourglass and Teardrop Inlays
Saddle: Bone
Pegs: Grover Keystone
Bridge Pins: TUSQ

Electronics
Under-Saddle Pickup: LR Baggs VTC
Controls: Soundhole-Mounted (Volume & Tone)
Output Jack: 1/4" Endpin Jack
Preamp: LR Baggs VTC

■Case
Original hard case

*Please note that the actual color may differ depending on the shooting equipment and your screen settings.

Condition: B+: In good condition for normal use.

Provided by HARU