2pcs 5.2mm H7 Tungsten Carbide Tip Straight Flutes Lathe Machine Chucking Reamer
Specifications:
- Cutting Diameter: 5.2mm / 0.205"
- Accuracy Class: H7
- Cutting Flute Length: 15mm / 0.59"
- Round Shank Diameter: 5.4mm / 0.21"
- Total Length: 90mm / 3.54"
- Flute Type: Straight Flute
- Number of Flutes: 4 Flutes
- Cutting Direction: Right Hand
- Material: C1/K30 Tungsten Carbide (Tip), High Speed Steel (Shank)
- Package Included: 2pcs x Chucking Reamer
- C1/K30 Tungsten Carbide is a tungsten-cobalt carbide with an average cobalt content of 6%. Carbide tip has high hardness, good toughness, wear resistance, high heat resistance, and anti-sticking. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Straight flute reamers allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. Suitable for use in through holes or holes without interruption, such as keyways. Designed with the base substrate without any coatings, good for general purpose applications.
- Widely used for processing, and bore machining. Designed for accurate reaming in stainless steel, aluminum, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc.. Great for light cut, repair work, or simply for enlarging holes.
- Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers. Always keep reamers clean, and used with machine oil for long service use.
- Notice: Should held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications. Can be used with a wide variety of tool holding systems.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
2pcs 5.2mm H7 Tungsten Carbide Tip Straight Flutes Lathe Machine Chucking Reamer
Specifications:
- Cutting Diameter: 5.2mm / 0.205"
- Accuracy Class: H7
- Cutting Flute Length: 15mm / 0.59"
- Round Shank Diameter: 5.4mm / 0.21"
- Total Length: 90mm / 3.54"
- Flute Type: Straight Flute
- Number of Flutes: 4 Flutes
- Cutting Direction: Right Hand
- Material: C1/K30 Tungsten Carbide (Tip), High Speed Steel (Shank)
- Package Included: 2pcs x Chucking Reamer
- C1/K30 Tungsten Carbide is a tungsten-cobalt carbide with an average cobalt content of 6%. Carbide tip has high hardness, good toughness, wear resistance, high heat resistance, and anti-sticking. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Straight flute reamers allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. Suitable for use in through holes or holes without interruption, such as keyways. Designed with the base substrate without any coatings, good for general purpose applications.
- Widely used for processing, and bore machining. Designed for accurate reaming in stainless steel, aluminum, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc.. Great for light cut, repair work, or simply for enlarging holes.
- Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers. Always keep reamers clean, and used with machine oil for long service use.
- Notice: Should held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications. Can be used with a wide variety of tool holding systems.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.