• Please check fitment notes & description for accurate information.
  •  
  • 2007-2009 Hyundai Santa Fe 2.7L 2006-2010 Kia Optima 2.7L 2007-2010 Kia Rondo 2.7L
  •  
  •  
  • Oxygen Sensor's Location:
  •  
  •  
  •  
  • How do I know the O2 sensor is good or not?
  •  
    • Check engine light on
    • A reduction in fuel economy.
    • Your catalytic converter fails unexpectedly
    • Exhaust emissions reach undesirable levels.
     
  • How to install the oxygen sensor?
  • For 2007-2009 Hyundai Santa Fe 2.7L Upstream Left Oxygen O2 02 Sensor 1 Bank 2

    Please check fitment notes & description for accurate information.

     

    2007-2009 Hyundai Santa Fe 2.7L
    2006-2010 Kia Optima 2.7L
    2007-2010 Kia Rondo 2.7L

     

     

    Oxygen Sensor's Location:

     

     

     

    How do I know the O2 sensor is good or not?

     

    • Check engine light on

    • A reduction in fuel economy.

    • Your catalytic converter fails unexpectedly

    • Exhaust emissions reach undesirable levels.

     

    How to install the oxygen sensor?

    Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.

     

    Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.

     

    Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.

     

    Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.)

     

    Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.

     

    Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage.

     

    Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.

     

    Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared.

     

     

    Must Know Before Buying:

     

    The following information is for instructional and guidance reference only. We try and make them as accurate as we can.

     

    If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. 
    If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks.

     

    Items that have been installed, altered or contaminated are non-returnable.

     

    1. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.


    2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return.

     

    The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.

     

     


    Item Specifics
    Manufacturer Part Number CAR1158990MA
    Type Oxygen Sensor
    Brand asucarparts
    Manufacturer Warranty 1 Year
    Interchange Part Number o2 sensor cost, 02 sensor, heated oxygen sensor car
    Other Part Number
    Custom Bundle No
    Modified Item No
    Number of Pieces 1
    Fitment Type Direct Replacement
    Thread Size M18
    Terminal Type Blade
    Universal Or Specific Fit Specific
    Attachment Method Screw-On
    Connector Gender Male
    Wire Harness Length 12.4 IN
    Sensor Type Heated
    Wire Quantity 4
    Output Signal Range 0.2V To 0.8V
    Mounting Type Threaded
    Pin Quantity 4
    Position Upstream Left
    Type Sensor
    Features Direct Fit

    Payment
    We accept multiple payment methods
     
    We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
    Shipping
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4. For domestic orders, If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    5.International Buyers Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 
    Returns

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    FAQ
    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 
    Feedback
    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    Shop Category
    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For 2007-2009 Hyundai Santa Fe 2.7L Upstream Left Oxygen O2 02 Sensor 1 Bank 2

    Please check fitment notes & description for accurate information.

     

    2007-2009 Hyundai Santa Fe 2.7L
    2006-2010 Kia Optima 2.7L
    2007-2010 Kia Rondo 2.7L

     

     

    Oxygen Sensor's Location:

     

     

     

    How do I know the O2 sensor is good or not?

     

    • Check engine light on

    • A reduction in fuel economy.

    • Your catalytic converter fails unexpectedly

    • Exhaust emissions reach undesirable levels.

     

    How to install the oxygen sensor?

    Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.

     

    Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.

     

    Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.

     

    Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.)

     

    Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.

     

    Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage.

     

    Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.

     

    Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared.

     

     

    Must Know Before Buying:

     

    The following information is for instructional and guidance reference only. We try and make them as accurate as we can.

     

    If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. 
    If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks.

     

    Items that have been installed, altered or contaminated are non-returnable.

     

    1. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.


    2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return.

     

    The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.

     

     

    Item Specifics
    Manufacturer Part Number :CAR1158990MA
    Type :Oxygen Sensor
    Brand :asucarparts
    Manufacturer Warranty :1 Year
    Interchange Part Number :o2 sensor cost, 02 sensor, heated oxygen sensor car
    Other Part Number :
    Custom Bundle :No
    Modified Item :No
    Number of Pieces :1
    Fitment Type :Direct Replacement
    Thread Size :M18
    Terminal Type :Blade
    Universal Or Specific Fit :Specific
    Attachment Method :Screw-On
    Connector Gender :Male
    Wire Harness Length :12.4 IN
    Sensor Type :Heated
    Wire Quantity :4
    Output Signal Range :0.2V To 0.8V
    Mounting Type :Threaded
    Pin Quantity :4
    Position :Upstream Left
    Type :Sensor
    Features :Direct Fit


    We accept multiple payment methods
     
    We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4. For domestic orders, If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    5.International Buyers Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 
    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    asucarparts_All rights reserved.