ANCEL JC200 2-Cylinder Fuel Injector Tester Machine for Cars & Motorcycles, 12V Injector Diagnostic Tool with LCD Display, Pressure Adjustment & Built-In Air Pump
The ANCEL JC200 2-Cylinder Injector Tester is a professional fuel injector diagnostic machine designed for accurate testing and evaluation of fuel injectors used in both cars and motorcycles. Combining mechanical engineering with advanced microcomputer signal output technology, the JC200 simulates real engine operating conditions to test injector performance with precision. Powered by a DC 12V supply, it features a clear LCD digital display, built-in pressurized air system, and stable pressure output to ensure consistent and reliable test results. The unit supports both manual and automatic testing modes, allowing technicians to perform injector uniformity tests, spray atomization observation, tightness and leakage checks, and precise fuel injection volume measurement. With adjustable RPM ranging from 100 to 9900, test durations from 30 to 600 seconds, and a 150ml recyclable fuel tank, the JC200 delivers efficient, low-cost injector diagnostics. Its bright backlight enables clear visual inspection of spray patterns, while replaceable composite joints support different injector types. Compact, portable, and easy to operate, the ANCEL JC200 is an ideal tool for workshops, mechanics, and motorcycle service professionals seeking dependable injector testing and maintenance.
JC200 Key Features:
● LCD Digital display
● 12V battery powered
● Fuel injection volume testing
● Fuel injection uniformity and atomization performance testing
● Manual testing
● Automatic testing
Item Parameters
Operating Voltage: DC12V
Fuel Tank Capacity: 150ML
RPM: 100-9900 rpm
Duration: 30-600 seconds
Pressure: 1.2-1.5 bar
RPM: 100-9900 rpm
Operating Instructions
1. Remove the injector nozzle from the vehicle.
2. Place the injector nozzle into the ultrasonic tank for cleaning.
3. Reinstall it into the inspection window for fuel injection testing, allowing direct observation of fuel spray and atomization.
4. Cleaning results can be directly observed on the equipment.
🔥 Main functions
✅ (1) Uniformity test: to check uniformity of the injections.
✅ (2) Atomization observation: with help of the backlight, you can observe the spray atomization situation of the injector in a comprehensive and careful manner.
✅ (3) Tightness test: it can detect the tightness and dropping of the fuel injector under working pressure.
✅ (4) Fuel injection volume detection: it can detect the fuel injection volume of the injector under specific working conditions.
🔥 Main features
✅ (1) Low-cost solution of injection test.
✅ (2) Use pressurized air to push test fluid, ensure stable pressure output,
achieve consistence in test conditions.
✅ (3) DC12V power supply, enhance portability of the product.
✅ (4) The oil tank liquid level is displayed visually, and the test agent can be
recycled.
✅ (5) Bright background light, you can clearly see the various situations of the
fuel injector when it is working.
✅ (6) Replaceable composite joints for different injector type.
🔥Technical specifications
Power supply: DC12V Vehicle Battery, 2Amp
Relative humidity: <85%
Environment temperature: -5oC ~ + 50oC
Tank Capacity: 150ml
Cylinder Volume: 100ml
RPM: 100~9900 step 100
Time: 30~600 Seconds
Oil Pressure: 1.2~1.5bar (Fixed)
Pressure relief: Manual
Operating Instructions
1. Button Functions:
a) -: Time adjustment / Speed adjustment.
b) +: Time adjustment / Speed adjustment.
c) MODE: Mode key, cycles through modes (Manual mode M, Automatic mode A).
d) START: Start/Stop key, short press to start when stopped, short press to stop when running.
2. Indicator Functions:
a) M: Manual mode.
b) A: Auto Mode.
3. Operation Instructions:
a) In stopped state, briefly press “MODE” to switch to M mode. Use “+/-” keys to adjust output speed (range: 100-9900 RPM). Briefly press “START” to activate operation at set speed.
b) In stopped state, briefly press “MODE” to switch to A mode. Use “+-” keys to adjust timer duration (30-600 seconds). Briefly press “START” to activate. Speed automatically adjusts within 500-6000 RPM range at +/-100 RPM increments every 0.5 seconds, stopping automatically upon countdown completion.
