DUAL COMPATIBILITY: Functions with both Natural Gas (NG) at 4" WC and Liquid Propane (LPG) at 10" WC output pressure settings
STANDARD SIZE: Features 1/2 inch connections with 2 copper adapters: 3/8" flare male to 1/2" NPT male and 3/4"-16 UNF (1/2" flare) male to 1/2" NPT for seamless integration with common gas line installations
PRESSURE REGULATION: Maintains consistent output pressure for stable gas flow in residential and commercial applications. fit for natural gas grills, heaters, ovens, gas welding equipment, NG gas, and a liquefied interchange pressure regulator, etc
CONVERTIBLE DESIGN: Easy switching between Natural Gas and LP modes for versatile installation options. The factory setting is Liquid Propane (LPG) at 10" WC output pressure settings. Please unscrew the 20.3mm diameter aluminum knob in the gas valve to switch the direction of the LP/NG copper shaft core. It is simpler, faster, and convenient
CONSTRUCTION: Durable metal body with precise pressure control mechanisms for reliable long-term performance. When the LPG gas regulating valve is used: LP inlet pressure is 2.74Kpa(11"w.c), outlet pressure is 2.45~2.55 kpa(10"w.c), and gas flow rate is 30L/min; when the natural gas regulating valve is used: LP inlet pressure is 1.74Kpa(7"w.c). Outlet pressure is 0.95~1.05 kPa (4"w.c), and flow rate: 50L/min
WARM TIPS: Rated operating temperature of the pressure regulator is-32°F-225°F (0°C-107°C). Do not install the regulator too close to the heating equipment or use it in a very cold environment. Heat or cold can change the resistance of the spring inside the regulator. And the gas pressure regulator will not turn off the flow of gas
Product description
Compatible with natural gas and liquid propane gas pressure regulator valves
The gas valve inlet and outlet are both 1/2” FPT pipe thread
The brass 1/2" NPT conversion adapter:
1/2" NPT male x 3/8" flare male
1/2" NPT male x 1/2" flare male
OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C).
Overall Dimension: 2-9/10” W x 2-3/10” D x 2-3/5” H.
Liquid Propane Gas Pressure Regulator
Factory setting is LP gas regulator mode
You can open the conversion shaft in the aluminum cover to view, pay attention to the direction of the conversion shaft LP arrow pointing to the aluminum cover
After confirming that the direction indicated by the arrow of the conversion shaft LP is correct, screw knob the aluminum cover assembly into the gas pressure regulator valve, then use it as Liquid Propane Gas Pressure Regulator.
Natural Gas Pressure Regulator
Convert to Natural Gas Pressure Regulator： Rotate and open the aluminum cover of the valve first, the brass NG gas shaft to exchange direction
Sure confirm the direction of the NG brass shaft, screw knob the aluminum cover assembly into the gas pressure regulator valve
After confirming that the direction indicated by the arrow of the conversion shaft NG is correct, screw knob the aluminum cover assembly into the gas pressure regulator valve .then use it as Natural Gas Pressure Regulator.
1/2 PSI gas regulator
CSA certification
The valve inlet and outlet are both 1/2” FPT pipe thread
Compatible with natural gas and liquid propane gas pressure regulator valves
Wide range of applications:
For natural gas and liquid propane applications, propane fire pits, natural gas fire pits, gas stoves, water heaters, residential/commercial water tanks and tankless water heaters, boilers, fryer, stoves