• Compatibility
  •  
    • For Toyota Tacoma 2005-2023 4WD 6 Lug Only
     
  • *Will NOT Fit 5-Lug Models.
  • *2016+ Tacoma TRD Models Require Upgraded Control Arms to Accommodate The 3" Lift Spacer. Will NOT Work Properly without The Control Arm Upgrade. Only Lift Up To 2.5" Will Work Without The Upgraded Control Arm.
  •  
  • *These rear blocks are tappered so you will have the correct stock pinion angle.
  • *This kit is designed to put your factory CV shafts back to the the stock angle after installing a 2-3" front

    • Leveling Lift Kit + Differ Drop Kit 2" Front 2" Rear For Toyota Tacoma 4WD 05-23

    Compatibility

     

    • For Toyota Tacoma 2005-2023 4WD 6 Lug Only

     

    *Will NOT Fit 5-Lug Models.

    *2016+ Tacoma TRD Models Require Upgraded Control Arms to Accommodate The 3" Lift Spacer. Will NOT Work Properly without The Control Arm Upgrade. Only Lift Up To 2.5" Will Work Without The Upgraded Control Arm.

     

    *These rear blocks are tappered so you will have the correct stock pinion angle.

    *This kit is designed to put your factory CV shafts back to the the stock angle after installing a 2-3" front

    *Don't fit TRD skid plate -Skid plates on TRD Pro editions, special edition models, and aftermarket skid plates may require different skid plate spacer bolts or modifications.

     

    How to Buy the Right Kit to Level Your Truck

    1. Using the tape measure, start from the center of your front wheel and measure to the very top of the fender well as pictured in red
    2. Write down the measurement
    3. For the rear wheel, measure from the center of your wheel to the top of the fender as pictured in red
    4. Write down the measurement
    5. Subtract the second measurement that you wrote down from the first measurement

     

    The number that you have after subtracting is the kit height you need in order to level out your truck. If you're buying the front kit only, just purchase that height (we recommend rounding down if you're in between heights). If you're buying a full kit, you will have to do some more math to find out what you need.

     

    For example, if the rear minus the front was 2", then you need a 2" front kit to have your truck sit level. However, if you're looking to buy a front and rear kit, then you will need to purchase the kit with the same difference to keep your truck level. So if you buy a 3" front, 1" rear kit, it will take care of the 2" you need for leveling out your truck (3" - 1" = 2").

     

    PRO TIP: Measure both sides! Sometimes each side will sit a little differently, so it's always good to measure both sides to figure out which kit is right for you. We recommend going for the smaller lift height to level your truck in case there is a major difference.

     

    Why Your Suspension Lift Kit Components Might Seem Too Thin

     

    Once you purchase a Suspension Lift Kit, you may notice that some of the components are not as thick as the lift has been advertised and that you were hoping to achieve. Fret not! In many situations involving vehicles with independent suspension, the thickness of the spacer is not directly related to the amount of lift provided.

     

    • With an independent suspension, the amount of lift can be significantly greater than the thickness of the lift spacer.

    Calculating the amount of lift to expect for an independent suspension application can be a little less straightforward. Independent suspension designs typically consist of at least one control arm, the inside of which is secured to the frame while the outside is attached to the wheel. It is supported by a spring or strut mounted someplace between the wheel and the frame. Suspension travel is accomplished by the control arm pivoting at the point where it is mounted to the frame. Since the wheel is mounted farther from the control arm pivot than the strut is, it experiences a longer travel than the strut does.

     

    • With a solid axle, the amount of lift is equal to the thickness of the lift spacer.

    When lifting a vehicle equipped with a solid axle (also known as a live or beam axle), both wheels are rigidly connected to each other and move, relative to the vehicle, as a single unit. Regardless of whether the axle is supported by leaf springs or coil springs, the amount of lift gained will be identical to the thickness of the spacer or block installed.



    Payment
    1, We accept multiple payment methods.
    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping

    1. Orders processed within 24 hours of payment verification.
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
    3. The images shown are not the actual item and are for your reference only.
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1.We stand behind every product we sell.
    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    2.Please contact us by eBay email first before you return the item.​

    Feedback

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Leveling Lift Kit + Differ Drop Kit 2" Front 2" Rear For Toyota Tacoma 4WD 05-23

    Compatibility

     

    • For Toyota Tacoma 2005-2023 4WD 6 Lug Only

     

    *Will NOT Fit 5-Lug Models.

    *2016+ Tacoma TRD Models Require Upgraded Control Arms to Accommodate The 3" Lift Spacer. Will NOT Work Properly without The Control Arm Upgrade. Only Lift Up To 2.5" Will Work Without The Upgraded Control Arm.

     

    *These rear blocks are tappered so you will have the correct stock pinion angle.

    *This kit is designed to put your factory CV shafts back to the the stock angle after installing a 2-3" front

    *Don't fit TRD skid plate -Skid plates on TRD Pro editions, special edition models, and aftermarket skid plates may require different skid plate spacer bolts or modifications.

     

    How to Buy the Right Kit to Level Your Truck

    1. Using the tape measure, start from the center of your front wheel and measure to the very top of the fender well as pictured in red
    2. Write down the measurement
    3. For the rear wheel, measure from the center of your wheel to the top of the fender as pictured in red
    4. Write down the measurement
    5. Subtract the second measurement that you wrote down from the first measurement

     

    The number that you have after subtracting is the kit height you need in order to level out your truck. If you're buying the front kit only, just purchase that height (we recommend rounding down if you're in between heights). If you're buying a full kit, you will have to do some more math to find out what you need.

     

    For example, if the rear minus the front was 2", then you need a 2" front kit to have your truck sit level. However, if you're looking to buy a front and rear kit, then you will need to purchase the kit with the same difference to keep your truck level. So if you buy a 3" front, 1" rear kit, it will take care of the 2" you need for leveling out your truck (3" - 1" = 2").

     

    PRO TIP: Measure both sides! Sometimes each side will sit a little differently, so it's always good to measure both sides to figure out which kit is right for you. We recommend going for the smaller lift height to level your truck in case there is a major difference.

     

    Why Your Suspension Lift Kit Components Might Seem Too Thin

     

    Once you purchase a Suspension Lift Kit, you may notice that some of the components are not as thick as the lift has been advertised and that you were hoping to achieve. Fret not! In many situations involving vehicles with independent suspension, the thickness of the spacer is not directly related to the amount of lift provided.

     

    • With an independent suspension, the amount of lift can be significantly greater than the thickness of the lift spacer.

    Calculating the amount of lift to expect for an independent suspension application can be a little less straightforward. Independent suspension designs typically consist of at least one control arm, the inside of which is secured to the frame while the outside is attached to the wheel. It is supported by a spring or strut mounted someplace between the wheel and the frame. Suspension travel is accomplished by the control arm pivoting at the point where it is mounted to the frame. Since the wheel is mounted farther from the control arm pivot than the strut is, it experiences a longer travel than the strut does.

     

    • With a solid axle, the amount of lift is equal to the thickness of the lift spacer.

    When lifting a vehicle equipped with a solid axle (also known as a live or beam axle), both wheels are rigidly connected to each other and move, relative to the vehicle, as a single unit. Regardless of whether the axle is supported by leaf springs or coil springs, the amount of lift gained will be identical to the thickness of the spacer or block installed.



    1, We accept multiple payment methods.
    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.

    1. Orders processed within 24 hours of payment verification.
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
    3. The images shown are not the actual item and are for your reference only.
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1.We stand behind every product we sell.
    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    2.Please contact us by eBay email first before you return the item.​

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    Copyright of hightechdeals8. All rights reserved.
    Shop Category
     Store Home
     lift support
     Fuel Pump
     instrument light
     Door handles
     Blower Motor Fan
     Blower Motor Resistor
     Shocks Struts
     complete struts
     Wheel hub bearing
     Power Window Switch
     Window Regulator
     Oxygen Sensor
     Coilover
     Air Suspension
     Complete Strut
     Mass Air Flow Sensors
     Radiators
     Wheel lug nuts
     Windshield Wiper Motor
     Thermostat Housing
     Brake Rotors & Pads
     Secondary Air Injection Pump
     Transfer Case Shift Motor
     Running Board Motor
     Steering Shaft
     Center Console & Armrest
     HVAC
     LED headlight Assembly
     headlight motorcycle
     glow plug
     LED 3RD Brake Light
     Tire Pressure Sensor
     water Pump Impeller
     Starter
     Engine Mount
     Rectifier
     alternator
     Bumper Lip Splitter
     Driveshaft
     Catalytic Converter
     Power Steering Rack
     sensor
     Steering Rack
     ATV Brake Caliper
     Leveling Lift Kit
     fog lights
     Ignition Coil
     Rear View Camera
     stator
     Radiator Support
     Fuel Injector
     winch
     Towing Mirror
     Roof Rack
     Window Visor
     Tonneau Cover
     Light
     Cylinder Piston Gasket Kit
     PTO Clutch
     Drive Belt And Device
      Interior Parts
     Spindle
     Wheel Hub Bearing Knuckle
     Car Tools
     wheel spacers
     Throttle Body
     Turbocharger
     Spoilers
      steering knuckle-7
     CV Axle
     Parts & Accessories
     Spoiler Wing
     Jack Stands
     Bed Step
     Head Gasket
     Timing chain kit
     timing belt kit
     water pump
     power steering pump
     Hydraulic Lifter
     Door Lock Actuator
     AC Compressor
     oil pump
     Belt Tensioner
     rocker arm
     crankshaft
     camshaft
     Timing Solenoid
     Trailer Tools Series
     Air Filter
     All Parts Small
     Fuel Vapor Charcoal Canister
     Rocker Panels
     Other
    Hot Item
    New List Item