Stator for Honda MUV 700 Big Red 2009-2013 | # 31120-HL1-A02 31120-HL1-A01
 
KEY FEATURES
 

Brand new aftermarket stator

Direct replacement to your original unit. Plug-and-play, direct fit, easy installation

Highest grade of lamination materials

Highest grade of copper winding, resistant to 200 degrees Celsius

All products shipped are tested

DESCRIPTION

 

Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connectors included
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Vehicle models fitment

 

Honda MUV 700 Big Red -- 2009-2013

OEM part replacement

 

31120-HL1-A02
31120-HL1-A01

Specifications

 

Dimensions:
Interior diameter: 54 mm
Exterior diameter: 119 mm
Thickness: 20 mm
Length of wires stator to grommet: 80 mm
Length of wires grommet to plug: 450 mm
Length of pickup coil's wire to grommet: 80 mm

Other specifications:
Number of wires: 5
Number of plugs: 1
Number of pins: 5
Number of poles: 18
Wire to wire resistance:
Alternator: Yellow to Yellow = 0.7 ohms +/-20%
Alternator: Yellow to ground = O.L
Pickup: Blue/Yellow to Green/White = 220 ohms +/-20%

instructions

 

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Item Delivery

 

Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main New Jersey facility, we still guarantee that your order will be delivered within the specified time period.

This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.