I have a set of small block Mopar rocker arm shafts for LA type cylinder heads. These shafts are made in the U.S. from thick hardened steel. They feature banana groves and oiling holes that are positioned for the loading of mechanical rocker arms.  These shafts have removable and reusable end plugs for inspection and easy cleaning.  These are drilled on center for 5/16” hold down bolts and are for use with LA type cylinder heads including stock small block Mopar heads (273, 318, 340 & 360) or aftermarket cylinder heads including Edelbrock RPM, Indy LAX, Trick Flow, Speedmaster or other similar shaft mounted cylinder heads where mechanical rocker arms are being used.  They are far thicker and stiffer than stock or many aftermarket shafts to minimize flex with stiffer aftermarket valve springs and provide superior oil control with the grooves that spread the oil over the load area of the shaft and rocker arms.

 

They can also be used for W2 Econo heads that have a cast in pedestal if the bolt holes are opened up to use 3/8” hold down bolts.

These are not intended for W2 or W5 heads that use offset drilled shafts & blocks. 

 

Price is $220 for the pair shipped within the lower 48 states. 

 

I can ship internationally for the additional shipping cost.

Contact me with any questions.