10mm (3/8") Fuel Hose – AN6 / AN8 Equivalent
DIN 73379-B Cloth Braided Nitrile – 5 METRE LENGTH
Condition: Brand New  |  Brand: Danfoss SEL (EU Made)  |  Standard: DIN 73379 Type B
Quick Highlights
  • Supplied as: 1 x 5m continuous length (not per metre)
  • Size: 10mm ID (3/8")
  • AN Fitment: Commonly used with AN6 or AN8 barbed/push-on fittings (depends on barb OD & clamping)
  • Type: Cloth braided nitrile fuel hose
  • Use: Low-pressure fuel feed/return, vent, breather, vacuum lines
Product Overview
High-quality 10mm internal diameter fuel hose manufactured to DIN 73379-B. Built with a fuel/oil-resistant NBR inner core, reinforced with a textile braid, and finished with a durable CR outer layer for weather/ozone resistance. Suitable for petrol, diesel, oil and air in classic cars, V8s, motorcycles, marine setups, tractors and custom fuel systems.
AN Size Compatibility
10mm (3/8") ID is commonly matched to AN6 and can also work with AN8 hose tail barbs depending on the barb profile and clamping.
✅ Works with many AN6 barbs / push-on fittings
✅ Can suit AN8 hose tail barbs with tight, correct clamping
🔧 Always measure your fitting/barb OD for best fit
Specifications
  • Length: 5 metres (continuous)
  • Inner Diameter: 10mm (3/8")
  • Approx. AN Size: AN6 / AN8 equivalent
  • Inner Tube: NBR (fuel/oil resistant)
  • Reinforcement: Textile cotton/polyester braid
  • Outer Coating: CR (chloroprene) – weather/ozone resistant
  • Working Pressure: 10 bar
  • Burst Pressure: 30 bar
  • Temperature Range: -30°C to +80°C
Fluid Compatibility
✔ Petrol (E0–E10)  |  ✔ Diesel (up to B7)  |  ✔ Oil / Air / Coolant / Kerosene
Not for: E85, B100 biodiesel, or in-tank/submersible use.
Common Applications
  • EFI and carburetor fuel feed/return lines (low pressure)
  • Fuel vent & breather systems
  • Crankcase breather & catch can plumbing
  • Brake booster vacuum hose (V8s, diesels)
  • Marine fuel systems (outboard/tank lines)
  • Restorations & classic vehicles
  • Custom builds and motorsport use
What You’ll Receive
1 x 5m length of 10mm (3/8") fuel hose – supplied as one continuous piece.
Important Notes
• Not designed for in-tank/submersible use (use SAE 30R10 for in-tank).
• Always clamp correctly and verify compatibility for your application (especially AN6/AN8 fitment).
Warranty: 12 Months  |  Returns: Accepted if unused