The ECOMIX ENT001 pump group is a ready-to-install pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with built-in three-way brass mixer. You can choose between an ELODRIVE 20-80°C and an ELODRIVE STM electric servomotor. A Wilo Para 25/6 high-efficiency pump is installed. Forward and reverse can easily be reversed from right to left. In the upper area of ​​the pump group there are flat-sealing shut-off valves (1" IT) with built-in thermometers (0-160°C). If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in delivery). The well-thought-out thermal insulation made of EPP ensures an optimal climate inside the insulation so that no heat build-up occurs. If several pump groups from the ECOMIX series are used, the individual insulation elements together with the distribution bar form an elegant, perfect unit.

Technical data:

▸ Flow 1,600 l/h Max.
▸ Temperature 110°C
▸ Max. Pressure 6 bar
▸ Min. Temperature 10 °C Kvs 8.3
▸ Ball valves Brass CW617N
▸ Insulation material EPP 38 g/l
▸ Thermal conductivity (λ 40”C) 0.038 W/mK
▸ Fire protection class ISO 3795
▸ EPDM sealing set
▸ Consumer connections 1”IG
▸ Connections system 1”½ AG

Technical data Wilo Para 25/6:

▸ Delivery height max: 6m
▸ Flow rate max: 3.6m³/h
▸ Temperature range: -20°C to +110°C
▸ Power consumption: 3W-43W
▸ Operating pressure: max. 10bars
▸ el. Connection: 230V/50HZ

Technical data Elodrive 20-80°C mixer motor with control:

Technical data Elodrive servomotor:
▸ Power consumption: 3.5VA (3.5Watt)
▸ Cable with Schuko plug: 2m
▸ NTC sensor hard-wired, length 1m
▸ Temperature setpoint setting: +20°C to +80°C
▸ Internal temperature limitation: +60°C or 70°C
▸ Status and error display red and green LED
▸ Protection class: II, fully insulated
▸ Manual adjustment via release button
Connection: 230V/50HZ Technical data Elodrive servomotor: ▸ Rated voltage: 230Volt, 50Hz ▸ Power consumption: 3.5VA (3.5Watt) ▸ Torque: 6Nm ▸ Manual adjustment via release button ▸ Running time: 135 seconds 90° ▸ Position indicator two-color, reversible ▸ Protection class: II fully insulated ▸ Protection class: IP40 ▸ EMC CE according to 2004/108/EC ▸ Low voltage directive: CE according to 2006/95/EC
▸ Two-color position indicator, reversible
▸ Protection class: II, fully insulated
An ELODRIVE ST 10 servomotor is installed. A Wilo Para 25/6 high-efficiency pump is also installed.
▸ EMC CE according to: 2004/108/EC
▸ Power consumption: 3.5VA (3.5Watt)
▸ Ambient temperature: 0°C to +50°C
▸ Maintenance: maintenance-free
▸ Housing material: PC (polycarbonate) glass fiber reinforced