|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Feature：
Very Small Angles May Be Set With Ease And Accuracy Using Standard Gauge Block Sets Because Of The Built In .200" Minute Steps.
Distance Of Roll: 4", Accuracy Is Further Enhanced By The Fact That The Center Distance Between The Rolls 4" Is Held Within .0002".
High Precision, Solid One-Piece Steel Construction.
Provides A Quick And Accurate Means Of Holding A Work Piece At An Angle For Machining, Drilling Or Grinding.
Description：
Vise Width: 3"
Vise Capacity: 4-3/8"
Vise Length: 7-1/2"
Vise Height: 3-5/8"
Jaw Height: 1-1/2"
Sine Range: 0 - 60 Degree
Square And Parallel Within .0002"
Overall Dimension: 3''L × 7-1/2''W × 4-1/4''H (When Closed)
Weight: 18 Lbs
Package List:
1 × 3" Jaw Toolmaker Sine Vise
Notes:
Due To Manual Measurement,Please Allow A Little Error And Make Sure You Do Not Mind Before Ordering.
Monitors Are Not Calibrated Same, Item Color Displayed In Photos May Be Showing Slightly Different From The Real Object.Please Take The Real One As Standard.
| Item Specifics | |
|---|---|
| Brand | findmall |
| MPN | IN5180058AL |
| Manufacturer Warranty | 1 Year |
| Type | Machine Vise |
| Vise Width | 3" |
| Vise Capacity | 4-3/8" |
| Vise Length | 7-1/2" |
| Vise Height | 3-5/8" |
| Jaw Height | 1-1/2" |
| Sine Range | 0 - 60 Degree |
| Square And Parallel Within | .0002" |
| Weight | 18 Lbs |
| Overall Dimension | 3'' L × 7-1/2'' W × 4-1/4'' H (When Closed) |
Fold over fold
Usually your Items will be shipped within 1-3 business day after your payment is cleared.
Refund is valid within 30 days after the payment date
Item must be returned in original packing same as reached
 3" Jaw Toolmaker Sine Vise Grinding Ground Steel Clamping Milling Bench Vise
Feature： Very Small Angles May Be Set With Ease And Accuracy Using Standard Gauge Block Sets Because Of The Built In .200" Minute Steps. Distance Of Roll: 4", Accuracy Is Further Enhanced By The Fact That The Center Distance Between The Rolls 4" Is Held Within .0002". High Precision, Solid One-Piece Steel Construction. Provides A Quick And Accurate Means Of Holding A Work Piece At An Angle For Machining, Drilling Or Grinding.
Description： Vise Width: 3" Vise Capacity: 4-3/8" Vise Length: 7-1/2" Vise Height: 3-5/8" Jaw Height: 1-1/2" Sine Range: 0 - 60 Degree Square And Parallel Within .0002" Overall Dimension: 3''L × 7-1/2''W × 4-1/4''H (When Closed) Weight: 18 Lbs
Package List: 1 × 3" Jaw Toolmaker Sine Vise
Notes: Due To Manual Measurement,Please Allow A Little Error And Make Sure You Do Not Mind Before Ordering. Monitors Are Not Calibrated Same, Item Color Displayed In Photos May Be Showing Slightly Different From The Real Object.Please Take The Real One As Standard.
Introduction of Promotion
Fold over fold Payment
Shipping
Usually your Items will be shipped within 1-3 business day after your payment is cleared. Returns
Refund is valid within 30 days after the payment date Item must be returned in original packing same as reached Contact Us
If you are satisfied with the product you received,please leave us positive feedback and 5 scores .
Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.
We care about our valued customers, and will always try to help you. So if you have any problems, please e-mail us immediately.
All rights reserved. |
Hot Item
New List Item
Store Category |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
On Jan 31, 2026 at 06:37:23 PST, seller added the following information: