image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image

Feature:

1. Fully Automatic: The automatic sensor button is controlled by the water . Before turning on the water pump, please turn on the faucet to ensure that there is water flowing through the water pump.
2. Intelligent Protection: When the water inlet in the pump is close to 0, the water pump will stop working when the water pressure is turned on, and the water shortage protection will be turned on.
3. Strong Compatibility: This booster water pump can be used with both tank and tankless water heaters to bring convenience to your life.
4. Enhanced Water Pressure: Whether you are troubled by the problem of low water pressure, this pump can increase the water pressure and provide you with a steady stream of water.
5. Low Noise: The sound of the booster pump is low and will not disturb your neighbors, which is very suitable for home use.


Specification:

Item Type: Water Pressure Booster Pump
Material: ABS, red copper
Insulation Class: ClassH
Protection Class: IP56
Supercharging Effect: 65Pa
Noise: Low
Open Mode: Automatic water control
: 15L/minute
Head: Approx. 18m / 59.1ft
Piping Inner Diameter: Approx. 15mm / 0.6in
Medium Temperature: 2-65℃


Package List:

1 x Water Pressure Booster Pump

1 x Power Adapter
1 x Water Pipe
1 x Instruction
1 x Hook


Note:

1. The water pump has a built‑in water switch valve. The minimum rate of 1.5L/min is required to open the valve to start the pump. If the water switch cannot be opened, the power supply must be disconnected again for 3 to 5 seconds and the water pump will be forced to start for 10 seconds. Power on and work for 10 seconds, it will automatically stop, indicating that the water switch valve is not open.
2. Test Method: Take a mineral water bottle and connect it. Generally, a mineral water bottle is a 500ml bottle, and about 3 bottles can be connected in one minute, which can be installed and used.