A1 Series H11/H8/H9 LED Bulbs Replace halogen
Note:Our LED bulbs only replace halogen or led headlamps.Can not replace the HID headlamps. Please double check before order.

◆500% Brighter than Halogen: 80W 6000K cool white, with clear visibility and perfect beam pattern, so you can enjoy good vision while driving at night.

◆Super Focused Beam Pattern:A1plus led bulbs with 1.0mm ultra-thin centered light emitting. No dark spots or foggy light, do not blind oncoming traffic.
◆10mins Easy Installation: The LED bulb’s almost 1:1 design as halogen. Plug and play. No other tools are needed
◆360° Adjustable Beam Pattern: Adopts 360° adjustable locker ring to ensure the best beam pattern. except H1, H3, 880, PSX26W
◆50,000 hours Lifespan: A1 plus comes with a copper base board, cold pressed aluminum heat sink and 12,000rmp cooling fan. Better solve the dimming or over heated of led bulbs.
◆Need Canbus Decoder/ Resistor: These A1 plus series LED bulbs can work well on most vehicles. But when they cause the flickering issue or error code on your vehicle, you will need one pair of the decoder to cancel the error.

Item Specifics:
Model: A1plus Series
Technology: LED
Fitment Type: Direct Replacement
Voltage: DC 9-32V
Power: 80W/per pair
Luminous Flux: 24000LM/per pair
Color Temperature: 6500K
Lamp beads: 3570CSP
LED Chips: customized LED chips
LED Drivers: Built-in Drivers
Lifespan: Over 50,000 hours
Decoding: Built-in decoding
Waterproof Rate: IP67 Water and Dust Seal, CE, RoHS
Operating Temperature: -40℃~+150℃

 

Two-way heat dissipation channel:

1.All-in-one aluminum profile as heat conduction system, 360-degree heat radiating

2.High speed mute fan(12000R/Min), high Air flow for faster cooling rate

 

 

Package Include:
2 x H11/H8/H9 LED Headlights Bulbs
(Random delivery of new and old packaging in the box)
 

 

Install Caution:

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 

2. Put the vehicle into park or make sure it is securely in gear. 

3. Be sure to turn off the ignition and remove the key. 

4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 

5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 

6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 

7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

 

 

❤  If the products have any problems, please do not open a return dispute or return application or neutral / bad evaluation directly, contact us through eBay information. 

❤  We will be definitely give you a satisfying solution.We will not cause you any losses.Thanks for your understandings.

 

 

On Aug 18, 2025 at 04:33:03 PDT, seller added the following information:

Datacaciques