Artikelbeschreibung | Item Description

 

WBT Nextgen Polklemme zur Übertragung von analogen und digitalen Audio/Videosignalen. Original Produkte vom autorisierten Vertriebspartner

 

WBT-0730.11 Polklemme 2x Rot und 2x Weiß

 

• besonders hoher Kontaktdruck für Kabelschuhe durch Feingewinde und Pflasterfräsung
• pat. zweiteilige Spannmutter für maximalen Halt der Verbindung
• Löt- oder Crimpanschluss mit Torxschraube
• Platindirektbeschichtung (nickelfrei)
• max. Dauerstrom 70 A
• verdrehgesicherte Montage
• Puzzlescheibensystem

• Leiterquerschnitt (max.): Außen: 6 mm² (9 AWG)
• Innen: 10 mm² (7 AWG)
• Anschlusstechnik: Außen: 4-mm-Bananenstecker, Kabelschuhe (6 - 8 mm Gabel), Crimpen
• Innen: Crimpen oder Löten
• Wandstärke: 0,1 - 6 mm

Bei uns erhalten Sie das komplette WBT Sortiment inkl. Zubehör aus einer Hand. Schauen Sie gerne in unserem Shop nach weiteren, originalen WBT Produkten und Zubehör Artikeln und sparen Sie Versandkosten. Kontaktieren Sie uns gerne bei Fragen.

WBT-0730.11 Polished and platinum-plated pole terminal, 2x red and 2x white

 

WBT pole terminal for the transmission of analog and digital audio and video signals. Original WBT products from authorized distributor

WBT-0730.11 Pole terminal 2x red and 2x white

 

Brief profile: WBT-0730.11:

• Particularly high contact pressure for cable lugs thanks to fine thread and milled paving
• pat. two-part clamping nut for maximum connection hold
• Solder or crimp connection with Torx screw
• Direct platinum coating (nickel-free)
• Max. continuous current 70 A
• Anti-twist mounting
• Puzzle disk system

Product for the highest demands on signal transmission, mechanics and design

Outstanding mechanics, solid construction and the two-part clamping nut with freely rotatable pressure piece enable high contact pressure and therefore low, constant contact resistance - the prerequisite for minimal sound interference. The elegant design of the pole terminal is enhanced by the direct platinum-coated high-gloss surface, which prevents any corrosion.
To achieve this, the pole terminal is polished before gold-plating, resulting in an extremely hard-wearing and abrasion-resistant surface.

External connection
>> 4 mm banana plug
A 4 mm banana plug can be connected in the front part of the clamping nut.

>> Cable lugs and crimped cable ends (up to 6 mm²)
WBT's patented clamping nut system allows cable lugs and crimped cable ends to be connected under high pressure. Thanks to the pavement milling of the base of the pressure piece, the connection is held securely and permanently with very low contact resistance. Shearing of cable strands is also prevented if bare cable ends are used.

Internal connection
Cables with a conductor cross-section of up to 10 mm² can be used internally.
WBT recommends the crimp connection method. However, the connections can also be soldered.

 

• Conductor cross-section (max.): Outside: 6 mm² (9 AWG)
• Inside: 10 mm² (7 AWG)
• Connection method: Outside: 4 mm banana plugs, cable lugs (6 - 8 mm fork), crimping
• Inside: Crimping or soldering
• Wall thickness: 0.1 - 6 mm

 

We offer the complete WBT range including accessories from a single source. Take a look at our store for other original WBT products and accessories and save on shipping costs. Please contact us if you have any questions.