2018 and Up Toyota Camry 10" 500W RMS Subwoofer NVX PBK-TOYCAM-G8

BE-TOYCAM-G8 Product Details: Custom-fit 10" Sealed Enclosure for 2018 and Up Toyota Camry vehicles Installs in the driver's side of the trunk and sacrifices very little space Power Handling: 500W RMS Preloaded with a single VS102v2 Subwoofer Enclosure constructed of hand-laid fiberglass Carpeted to match the interior Includes mounting hardware and installation instructions Pressed paper cone High roll foam surround 2.5" high temperature aluminum voice coil 127oz. triple stacked ferrite magnet Frequency response: 20-220 Hz Sensitivity: 87dB Final Wired Impedance: 2 Ohm 1-year Warranty from the Original Purchase Date VADM1 Product Details: Marine Certified Monoblock Class D Car Amplifier Peak Power Rating: 1000 Watts RMS Power Rating: 4 ohms: 180 watts x 1 channel 2 ohms: 320 watts x 1 channel 1 ohm: 500 watts x 1 channel Cutting-edge Micro Class D technology allows amplifiers to be extremely compact LED power (blue) and protect (red) indicators Conformal Coated Marine grade circuit board Balanced Differential Inputs, to eliminate noise picked up by signal cables Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Input sensitivity: 0.2V-5V Variable low-pass filter (50-250 Hz) Bass Boost: 0 - +18dB boost @ 45Hz Frequency Range: 20 - 20KHz Total Harmonic Distortion: <0.3% CEA-2006 compliant amplifier Dimensions: 6.8"L x 3.3"W x 1.5"H 1-year Warranty from the Original Purchase Date XLACA2X Product Details: Active 2-channel line output converter and line driver Designed to work with factory and aftermarket audio systems Speaker-level inputs handle up to 30V (225 watts RMS) Low-level RCA inputs handle 150 mV - 2 Volts RCA outputs Provide up to 9.5 Volts of output Adjustable xBOOST corrects for bass roll-off Auto turn-on via DC offset or Audio Detection Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down 12 Volt turn-on output for aftermarket amplifiers Selectable Ground Isolation switch to eliminate ground and alternator noise Molex terminals for speaker signal and power Wired remote bass level control included LED Clip indicator Total Harmonic Distortion: 0.001% Signal to Noise: >105 dB Frequency Response: 10-25,000 Hz 1-year Warranty from the Original Purchase Date XKIT82 Product Details: 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit Designed for car audio systems up to 800 watts RMS Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer Tinned conductors for corrosion resistance Pre-installed black nylon mesh covering protects power wire from being damaged Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high-powered systems Pre-terminated seamless power and ground ring terminals provide reliable performance Full Spec cables meet or exceed the American Wire Gauge standards Strand Count: 735 CEA-2015 and BC5W2 Compliant 1-year Warranty from the Original Purchase Date

2018 and Up Toyota Camry 10" 500W RMS Subwoofer NVX PBK-TOYCAM-G8

BE-TOYCAM-G8

Product Details:

Custom-fit 10" Sealed Enclosure for 2018 and Up Toyota Camry vehicles
Installs in the driver's side of the trunk and sacrifices very little space
Power Handling: 500W RMS
Preloaded with a single VS102v2 Subwoofer
Enclosure constructed of hand-laid fiberglass
Carpeted to match the interior
Includes mounting hardware and installation instructions
Pressed paper cone
High roll foam surround
2.5" high temperature aluminum voice coil
127oz. triple stacked ferrite magnet
Frequency response: 20-220 Hz
Sensitivity: 87dB
Final Wired Impedance: 2 Ohm
1-year Warranty from the Original Purchase Date

VADM1

Product Details:

Marine Certified Monoblock Class D Car Amplifier
Peak Power Rating: 1000 Watts
RMS Power Rating:

4 ohms: 180 watts x 1 channel
2 ohms: 320 watts x 1 channel
1 ohm: 500 watts x 1 channel

Cutting-edge Micro Class D technology allows amplifiers to be extremely compact
LED power (blue) and protect (red) indicators
Conformal Coated Marine grade circuit board
Balanced Differential Inputs, to eliminate noise picked up by signal cables
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Input sensitivity: 0.2V-5V
Variable low-pass filter (50-250 Hz)
Bass Boost: 0 - +18dB boost @ 45Hz
Frequency Range: 20 - 20KHz
Total Harmonic Distortion: <0.3%
CEA-2006 compliant amplifier
Dimensions: 6.8"L x 3.3"W x 1.5"H
1-year Warranty from the Original Purchase Date

XLACA2X

Product Details:

Active 2-channel line output converter and line driver
Designed to work with factory and aftermarket audio systems
Speaker-level inputs handle up to 30V (225 watts RMS)
Low-level RCA inputs handle 150 mV - 2 Volts
RCA outputs Provide up to 9.5 Volts of output
Adjustable xBOOST corrects for bass roll-off
Auto turn-on via DC offset or Audio Detection
Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
12 Volt turn-on output for aftermarket amplifiers
Selectable Ground Isolation switch to eliminate ground and alternator noise
Molex terminals for speaker signal and power
Wired remote bass level control included
LED Clip indicator
Total Harmonic Distortion: 0.001%
Signal to Noise: >105 dB
Frequency Response: 10-25,000 Hz
1-year Warranty from the Original Purchase Date

XKIT82

Product Details:

8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
Designed for car audio systems up to 800 watts RMS
Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer
Tinned conductors for corrosion resistance
Pre-installed black nylon mesh covering protects power wire from being damaged
Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high-powered systems
Pre-terminated seamless power and ground ring terminals provide reliable performance
Full Spec cables meet or exceed the American Wire Gauge standards
Strand Count: 735
CEA-2015 and BC5W2 Compliant
1-year Warranty from the Original Purchase Date