eBay

---The PicoVNA 106 are low cost, small footprint, USB controlled Vector Network Analyzers that offer up to 6 GHz of bandwidth with performance that punches well above their weight. ---Accurate: With up to 124 dB of dynamic range and RMS trace noise of just 0.005 dB at maximum resolution bandwidth, you know that what you are recording is a true reflection of the device you are measuring. ---Fast: Capable of up to 5500 dual-port S-parameter measurements per second; that is, creating a 201-point two-port .s2p file takes less than 38 ms. ---Reliable: The quad-RX architecture minimizes uncorrectable errors and delays. Simple: Automated calibration with the E-Cal kit makes it easier and faster to get up and running. ---Your PicoVNA comes bundled with everything to get the unit up and running: USB 2 cable, a power supply (12 V 3.5 A universal supply), measurement cables and a sturdy carry case to keep it all in, plus a USB drive with the PicoVNA software and digital copies of the user guide. ---The new PicoVNA 5 software makes measurements easy. The intuitive controls allow you to fully customize your viewports to your needs. Add a mix of frequency and time domain measurements, group markers across traces and configure readouts exactly how you need them. Available on Windows, Mac, Linux and Raspberry Pi. ---Ex demo unit, some wear and tear to unit. 3 months warranty (basic operation) included and fully tested. PicoVNA 106 Specifications: Measurement bandwidth 140 kHz, 70 kHz, 35 kHz, 15 kHz, 10 kHz, 5 kHz, 1 kHz, 500 Hz, 100 Hz, 50 Hz, 10 Hz Dynamic range 0.3 MHz to 10 MHz,10 MHz to 6 GHz (10 Hz bandwidth Maximum test power: PicoVNA 106: +6 dBm PicoVNA 108: 0 dBm No averaging) Temperature stability, typical 0.02 dB/°C for F < 4 GHz, 0.04 dB/°C for F ≥ 4 GHz (Measured after an S21 calibration) Spurious responses –76 dBc typical, –70 dBc max. (The main spurious response occurs at close to (2 x RF + 1.3) or (3 x RF + 2.6) MHz, where RF is the test frequency in MHz. For example, when testing a bandpass filter with a centre frequency of, say 1900 MHz, an unwanted response will occur around 632.47 or 949.35 MHz. In all known cases the levels will be as stated.) Controlling PC data interface USB 2.0 Weight 1.9 kg Temperature range (operating) +5 °C to +40 °C Temperature range (storage) –20 °C to +50 °C Humidity 80% max, non-condensing. Vibration (storage) 0.5 g, 5 Hz to 300 Hz Power source and current +12 to +15 V DC, 22 W (PicoVNA 106). Power source connector 5.5 mm diameter hole, 2.1 mm diameter centre contact pin. Centre pin is positive. Safety Conforms to EN61010-1 and EN61010-2-030. External dimensions (mm) 286 x 174 x 61 (L x W x H) Excluding connectors. Support for (3rd party test software) DLL included in user interface software.

The PicoVNA 106 are low cost, small footprint, USB controlled Vector Network Analyzers that offer up to 6 GHz of bandwidth with performance that punches well above their weight.

Accurate: With up to 124 dB of dynamic range and RMS trace noise of just 0.005 dB at maximum resolution bandwidth, you know that what you are recording is a true reflection of the device you are measuring.

Fast: Capable of up to 5500 dual-port S-parameter measurements per second; that is, creating a 201-point two-port .s2p file takes less than 38 ms.
Reliable: The quad-RX architecture minimizes uncorrectable errors and delays. Simple: Automated calibration with the E-Cal kit makes it easier and faster to get up and running.

Your PicoVNA comes bundled with everything to get the unit up and running: USB 2 cable, a power supply (12 V 3.5 A universal supply), measurement cables and a sturdy carry case to keep it all in, plus a USB drive with the PicoVNA software and digital copies of the user guide.

The new PicoVNA 5 software makes measurements easy. The intuitive controls allow you to fully customize your viewports to your needs. Add a mix of frequency and time domain measurements, group markers across traces and configure readouts exactly how you need them. Available on Windows, Mac, Linux and Raspberry Pi.

Ex demo unit, some wear and tear to unit. 3 months warranty (basic operation) included and fully tested.

PicoVNA 106 Specifications:

Measurement bandwidth	140 kHz, 70 kHz, 35 kHz, 15 kHz, 10 kHz, 5 kHz, 1 kHz, 500 Hz, 100 Hz, 50 Hz, 10 Hz
Dynamic range	0.3 MHz to 10 MHz,10 MHz to 6 GHz (10 Hz bandwidth Maximum test power: PicoVNA 106: +6 dBm PicoVNA 108: 0 dBm No averaging)
Temperature stability, typical	0.02 dB/°C for F < 4 GHz, 0.04 dB/°C for F ≥ 4 GHz (Measured after an S21 calibration)
Spurious responses	–76 dBc typical, –70 dBc max. (The main spurious response occurs at close to (2 x RF + 1.3) or (3 x RF + 2.6) MHz, where RF is the test frequency in MHz. For example, when testing a bandpass filter with a centre frequency of, say 1900 MHz, an unwanted response will occur around 632.47 or 949.35 MHz. In all known cases the levels will be as stated.)
Controlling PC data interface	USB 2.0
Weight	1.9 kg
Temperature range (operating)	+5 °C to +40 °C
Temperature range (storage)	–20 °C to +50 °C

Humidity	80% max, non-condensing.
Vibration (storage)	0.5 g, 5 Hz to 300 Hz
Power source and current	+12 to +15 V DC, 22 W (PicoVNA 106).
Power source connector	5.5 mm diameter hole, 2.1 mm diameter centre contact pin. Centre pin is positive.
Safety	Conforms to EN61010-1 and EN61010-2-030.
External dimensions (mm)	286 x 174 x 61 (L x W x H) Excluding connectors.
Support for	(3rd party test software) DLL included in user interface software.