Our LED bulbs only replace halogen or led headlamps.Can not replace the HID headlamps. Please double check before order.
Technical Specification:
Plug Type: 9005 （HB3）+9006 ( HB4 )
LED Quantity(each bulb): 2pcs* SHENKENUO 3570 chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Plug Type: 9005 （HB3）+9006 ( HB4 )
LED Quantity(each bulb): 2pcs* SHENKENUO 3570 chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Advantage:
*Latest SHENKENUO 3570 CSP chip light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
*Latest SHENKENUO 3570 CSP chip light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Package Included:
2pc 9005 LED headlight high beam
2pc 9006 LED headlight low beam
2pc 9005 LED headlight high beam
2pc 9006 LED headlight low beam
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.