eBay

11 Gauge 15 Degree 3/4" to 1-3/4" Coil Roofing Nailer Pneumatic Roof Nail Gun

Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails;
Adjustable shingle guide for quick shingle spacing;
Integrated side skid pads prevent the tool from sliding off roof when placed on its side;
High-capacity magazine holds up to 120 coil nails at a time; Tool free adjustable depth of drive for consistent and controllable nail fit; 360° tool-free air exhaust;
Interchangeable trigger for single shot/full sequential actuation (the black trigger) or bumper fire function (the red trigger);
BE CAREFUL OF DOUBLE FIRE DUE TO RECOIL: In “bump fire mode”, if safety tip is allowed to re-contact the workpiece following recoil (with the trigger held), an intended fastener will be driven; To avoid this undesirable double fire: 1. Do not push the nailer on the workpiece with strong force; 2.Allow recoil to take the nailer completely away from the workpiece; resistance to the recoil will force the tool back to the workpiece, which can result in a second fastener being driver from the nailer;
If you are not a skilled operator or contractor, highly recommended to replace the trigger to the black one for full sequential fire mode (single shot)

Product description

Versatile Nailing Range: Drives full head coil roofing nails from 3/4-inch to 1-3/4-inch, making it suitable for various roofing applications.
Adjustable Shingle Guide: Ensures quick and precise shingle spacing for a professional finish.
Enhanced Safety & Stability: Integrated side skid pads prevent the tool from sliding off the roof when placed on its side.
High-Capacity Magazine: Holds up to 120 coil nails at a time, reducing reload frequency and increasing efficiency.
Tool-Free Adjustments: Features an adjustable depth of drive for consistent nail placement and a 360° tool-free air exhaust for added convenience.
Dual Firing Modes: Interchangeable trigger allows switching between single shot/full sequential actuation (black trigger) and bump fire mode (red trigger) for speed or precision.

Preventing Double Fire in Bump Mode:

Avoid excessive force when pressing the nailer against the workpiece.
Allow full recoil before making the next contact to prevent unintended double firing.

Recommendation for Beginners: If you are not a skilled operator or contractor, switch to the black trigger for single-shot mode to enhance safety and control.