Highlight 10-24'' Dimable LED Backlight Lamps Update Kit Adjustable Light Board +2 LED Strips for LCD Monitor


Installation: 

If your monitor is using a inverter, then this kit replace the inverter to plug into the driver board; If your monitor is a high-voltage integrated power supply board, then the board energized, find 12V (capacitance), and then unplug the power supply,use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF. In simple terms, the original high voltage power supply is disconnected,instead of the inverter,in the original high-pressure front to take power. 


The LED Backlight Advantage: 
  • High Brightness LED backlight. 
  • Improved Dynamic Contrast Ratio. 
  • Improved Color Gamut for more Lifelike Images. 
  • Longer lifespan, typically lasting over 100,000 hours 
  • High shock/Vibration resistant. 
  • Low Heat Generation. 
  • Environmental Benefits. 
  • Not as fragile as LCD CCFL lamps . 
  • LED can be cut to fit the right size. 
  • Being solid state devices, the LED will perform exactly as when they were manufactured as opposed to the CCFL which loses light output continuously over their life up to 50%. 
  • By upgrading to this high brightness LED backlight. Now,you can experience lifelike images. 
How to replace: 
  • Replace the CCFL backlight lamps+ inverter by this kit, LED board+ LED strips. 
  • If your LCD inverter can not be removed which come with powerboard, you should find those pins(VIN, ON/OFF, ADJ, GND) from your board to driver the LED board. 
  • No instructions for kit, so, you should know how to find pins and how to install. 

LED strip: 
  • Size L/W/H: 540mm*4mm*3mm 
  • Lamps specification: 3528 
  • Can be cut by every 3 lamps as a group.(we have marked on the strips by line) 

LED board: 
  • Size L/W: 7cm*2cm 
  • Dimable, connect to the ADJ pin to adjust light. 
  • Input: 9-30V 
  • Output: 9.6V
  • VIN  : Voltage
  • ENA: On/Off
  • DIM: ADJ  adjust brightness
  • GND: Connecting Ground

Our Package:

  • Package including: LED board*1pc, LED strips*2pcs,Cable*1pc (no user manual)
  • Pack in bubbles first, Then put into hard PVC tube.

Other Size LED Strip, please click here.

For 15inch Length 310mm https://www.ebay.com/itm/123403960509

For 17inch Length 355mm https://www.ebay.com/itm/123821783310

For 19inch Length 395mm https://www.ebay.com/itm/123821786719

For 19inch wide Length 420mm https://www.ebay.com/itm/123821791593

For 22inch Length 488mm https://www.ebay.com/itm/123821794060

For 24inch Length 540mm https://www.ebay.com/itm/123634891276

For 26inch Length 580mm https://www.ebay.com/itm/123821794959

For 27inch Length 620mm https://www.ebay.com/itm/123821795505

Attention: 

  • Do not provide technical support .You should know how to use it. If not, Think twice about your order. Thanks! 
  • We have many different sizes. if you can't find, please feel free to contact me. 
  • The more quantity, the lower price. Please contact us for details.


About Payment:
  • We accept PayPal as the payment method only, you can use credit card through PayPal.
About Shiping:
  • We shall ship your items 1-2 days after your payment is cleared.
  • International Standard Flat Rate Shipping.
  • In general, it will takes 10-15 working days from China to USA,UK,Canada,Australia.15-25 working days for other countries.
  • If you don't receive your items OVER 30 days,please contact us.
About Refund:
  • If you are not satisfied with our products,we will resend or refund your full money.