Heavy Duty Cast Aluminum Transmission Pan 
 Extra Capacity / Custom Look
GM 200-4R
(2.5 quart extra fluid capacity over stock)

--- MADE IN THE USA ---

Magnetic drain plug and mounting hardware are included 
(Gasket Not Included)
Please check your vehicle for clearance before ordering

Upgrade your transmission with this Heavy Duty Cast Aluminum Transmission Pan designed for GM 200 4R. Crafted from durable cast aluminum, this pan offers a custom look and increased performance. With a lifetime limited manufacturer's warranty, you can trust that this Transmission Pan is built to last. Included in the package is the Transmission Pan and all mounting hardware, ensuring that your upgrade is complete. This pan is not a universal fitment, so please ensure that it is compatible with your specific vehicle before purchasing. Improve your driving experience with this Performance Part and take your vehicle to the next level.

This pan has been designed to meet the demands of high performance cars and offers an additional 2.5 quart fluid capacity. 

Overall height is 3.875 inches and is 1.275 inches taller than the stock pan. 

Dimensions: Click here for dimensions. 

(Always check your vehicle for clearance before ordering)

Benefits:

This PML pan fits many models of rear wheel drive cars with the GM 200–4R 4 speed automatic transmission. GM used this transmission from 1982 to 1990. Many models of these vehicles have the 200–4R:

  • Buick Regal T Type
  • Grand National
  • Chevrolet Monte Carlo SS

The 200–4R (or 200 R4) transmission is popular replacement transmission for high performance applications.

Always check your vehicle to verify clearance and fitment.

 (Configurations vary)

Inside of PML 200 4R Pan

The four rectangular areas on the bottom of the pan are the filter supports. The drain is at the top, right of the picture.

Filter Information

This PML pan works with stock filters. Example part numbers are: AC Delco TF234, Fram FT1057B, Fram FT1057C, Hastings TF60, Purolator P1194, Wix 58896

PML 200 4R transmission pans have filter supports so a filter extension is not needed.

The supports hold the filter at the same level as the stock pan. The distance from the bottom of the stock pan to the top of the flange is 2.4 to 2.6 inches. The distance from PML filter supports to the top of the flange is the same. The stock filter is about 4.8 inches tall.

Filter information is provided for reference only. Installer should verify transmission, filter and fitment based on the individual vehicle.

PML GM 200-4R drain and temp sending unit locations

Drain Location and Optional Temperature Sending Unit Machining

The PML 200 4R transmission pan has two bosses (thick areas) on the casting for drilling and tapping.

The location on the driver side is drilled and tapped for the drain. A magnetic drain plug is included with each pan.

The boss on the passenger side of the pan is not machined and optionally can be drilled and tapped for a temperature sending unit.

PML 200–4R Transmission Pans and Stock Pan Compared

PML 200 4R transmission pans compared to stock   PML 200 4R Transmission Pans compared to stock, top view


20 PERCENT RESTOCKING ON ALL RETURNS

CUSTOMER PAYS RETURN SHIPPING