The Tamiya TT-01 is converted to two-wheel drive, increasing the turning angle of the front tires.
Compatible with Type E and Type D (drift spec).
■Differences from the full set ●2 axles are from the kit, but the plastic parts have been removed. ●4 wiper plastic rings are used (for the old type, please prepare 850 bearings or 850 flange bearings separately). ●3 turnbuckles have been changed to set screws.
In order to do 2WD drifting, you will need a gyro, 8mm offset wheels, and drift tires in addition to the TT-01 and the mechanism. The old type TT-01 can also be installed if you have 850 bearings or 850 flange bearings.
Set contents Complete set of plastic parts (wiper, lower arm, knuckle, upper arm), 8 pillow balls, large adjuster, 8 small adjuster, large open adjuster, 2 small open adjusters, 2 aluminum ball nuts, 1 ball collar, 6 12mm enamel screws, 6 18mm enamel screws, 25mm enamel screws, 18mm screws, 2 16mm screws, 2 aluminum posts, 3mm spacers, 4 bearings
This makes the Tamiya TT-01 a 2WD car and increases the turning angle of the front tires. Compatible with Type E and Type D (drift spec). ■Differences from the full set ●2 axles are used by removing the plastic parts from the kit ●4 wiper plastic rings are used (for the old type, please prepare an 850 bearing or 850 flange bearing separately) ●3 turnbuckles have been changed to grub screws Please prepare the TT-01 body and mechanism separately. In order to drift in 2WD, in addition to the TT-01 and mechanism, you will also need a gyro, 8mm offset wheels, and tires for drifting. Set contents Complete set of plastic parts (wiper, lower arm, knuckle, upper arm), 8 pillow balls, large adjuster, 8 small adjuster, large open adjuster, 2 small open adjusters, 2 aluminum ball nuts, 1 ball collar, 6 12mm enamel screws, 6 18mm enamel screws, 25mm enamel screws, 18mm screws, 2 16mm screws, 2 aluminum posts, 3mm spacers, 4 bearings

We will ship it within 5 business days.
Thank you very much!