An intonation adjustment tool designed for Ibanez's original tremolo bridge.
For Ibanez Edge/Lo-Pro Edge/Edge-Pro tremolo and 7-string tremolo only.
Cannot be used with Edge Zero/Edge Zero II/Edge III/TRS-TRM etc.
Product Introduction
The claws on the main body are attached to two places, the saddle and the fine tuner, and by turning the wheel at the rear, it is possible to adjust the intonation without loosening the strings while they are still attached.
Steps for adjusting intonation
1 Attach the part at the front of the tool according to the tremolo you are using.
2 Firmly hook the EJK1000 tabs onto the saddle and fine tuner, then turn the red wheel knob on the rear clockwise (tighten) to install.
3 Use a wrench to loosen the bolt that locks the saddle.
4Adjust the position by turning the red wheel knob on the back of the EJK1000. Turning it to the right moves the saddle towards the body end, and turning it to the left moves it towards the neck. Use a tuner or similar to adjust the saddle position for the correct intonation.
5. Tighten the saddle lock bolt securely, then remove the EJK1000.
Disclaimer: Please read
This item is a tool exclusively for Ibanez Edge/Lo-Pro Edge/Edge-Pro tremolos and their 7-string tremolos. It cannot be used with any tremolos other than those mentioned above (Edge Zero/Edge Zero II/Edge III/TRS-TREM, etc.). Please note.

We will ship it within 5 business days.
Thank you very much!