Please check the camera size carefully before make the order.
For (for reference)：
- Toyota RAV4 （2000-2012）
- Toyota Porte
- Toyota Vitz Platz Yaris Coupe
Specification:
- Image Sensor: CCD
- Effective Pixels: NTSC 512 (H)x492 (V)
- Horizontal Resolution: 420 TVL
- Minimum Illumination: 1.0Lux F=1.2 (0Lux with IR on)
- Night Vision: 5-10meters
- Lens: 2.8mm
- Diagonal Viewing Angle: 120 degree optional
- Synchronization: Internal synchronization
- Signal to noise ratio: >48db
- Signal System: NTSC
- Electronic Shutter: Auto
- Video Output: RCA interface, 1.0Vp-p, 75Ohm
- White Balance: Auto
- Backlight Compensation: Auto
- Power: DC 12V
- Current Consumption: 50-60mA, Max 130mA with IR on
- Operating Temperature: -20°C~ +60°C, RH95% Max
- Storage Temperature: -30°C ~ +80°C, RH95% Max
- Video cable length: 6m
- Power supply cable length: 1m
Features:
- Weatherproof, Can be Used both in car and home.
- Support NTSC Video system.
- High-definition and wide viewing angle.
- Applicable to variety of Vehicles: car, truck, RV, mini-van etc.
- Easy to install, you can install the monitor via mount holder or universal bracket.
- 6m Video cable.
- Can help avoid incidents and accidents abrasion well.
Package Included：
- 1x Car Rear View Camera
- 1x6m Video Cable
- 1x1m Power Cable
Install tips：
- Take out your license plate light at the back of your car.
- Fix the camera to where the stock license plate light was.
- Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
- Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
- Connect the video cable of the camera to the extension cord.
- Connect the extension cord to your car monitor.
- You will see the images when your car is in reverse shift.
