Climbing Technology CRIC - Rope Access, Rescue, Arborist, Skylotec

Climbing Technology CRIC Multifunctional rope clamp with integrated pulley for mountaineering, rope access work and rescue. Robust, practical and intuitive, it has four different modes of operation: ascender, pulley, rope clamp/pulley or progress-capture hauling pulley. Main features: its versatility, compact size and ease of use allow reducing to the minimum time, material and space needed in rope manoeuvres; it allows ascending the rope in accordance with EN 567 / EN 12841-B standards (ascender mode); it can be used as a simple pulley for lifting or transferring a load in accordance with the EN 12278 standard (pulley mode); the integrated ball-bearing sheave can be used as a simple redirect to make it easier to ascend a rope or to lift a person without the aid of additional connectors (rope clamp/pulley mode); it allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person, as in the case of a victim fallen into a crevasse (progress-capture hauling pulley mode); when used in pulley mode, the rope is free to run in both directions; instead, when the hauling-pulley mode is used, the rope can only run in one direction and it is locked in the opposite one; when used in progress-capture hauling pulley mode, it is possible to lower the lifted load by acting on the dedicated cord connected to the cam within the device; the easy opening, via an intuitive release button, makes the installation of the device on the rope swift – no matter the mode that is going to be used in – even with gloves on or while operating in difficult conditions; equipped with a steel cam featuring teeth that minimize rope wear but are effective in blocking the rope. In addition, the cam is designed with two slots to reduce the build-up of dirt, so maintaining the lock on the rope very efficient in any condition (muddy, frozen rope, etc.). Caution! This equipment is not a fall arrester (EN 353-2 / EN 12841-A) nor can it be used for self-belaying while climbing.

Climbing Technology CRIC - Rope Access, Rescue, Arborist, Skylotec

Climbing Technology CRIC

Multifunctional rope clamp with integrated pulley for mountaineering, rope access work and rescue. Robust, practical and intuitive, it has four different modes of operation: ascender, pulley, rope clamp/pulley or progress-capture hauling pulley.

Main features:

its versatility, compact size and ease of use allow reducing to the minimum time, material and space needed in rope manoeuvres;
it allows ascending the rope in accordance with EN 567 / EN 12841-B standards (ascender mode);
it can be uséd as a simple pulley for lifting or transferring a load in accordance with the EN 12278 standard (pulley mode);
the integrated ball-bearing sheave can be uséd as a simple redirect to make it easier to ascend a rope or to lift a person without the aid of additional connectors (rope clamp/pulley mode);
it allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person, as in the case of a victim fallen into a crevasse (progress-capture hauling pulley mode);
when uséd in pulley mode, the rope is free to run in both directions; instead, when the hauling-pulley mode is uséd, the rope can only run in one direction and it is locked in the opposite one;
when uséd in progress-capture hauling pulley mode, it is possible to lower the lifted load by acting on the dedicated cord connected to the cam within the device;
the easy opening, via an intuitive release button, makes the installation of the device on the rope swift – no matter the mode that is going to be uséd in – even with gloves on or while operating in difficult conditions;
equipped with a steel cam featuring teeth that minimize rope wear but are effective in blocking the rope. In addition, the cam is designed with two slots to reduce the build-up of dirt, so maintaining the lock on the rope very efficient in any condition (muddy, frozen rope, etc.).

Caution! This equipment is not a fall arrester (EN 353-2 / EN 12841-A) nor can it be uséd for self-belaying while climbing.