
110V60Hz Voltage Protector Specification: Ampere: 20A Temperature: -5 - 55° Humidity: ≤85%H.R Wattage:2200W Delay: 2-4mins Under Voltage Cut off: 90V (adjustable) Over Voltage Cut off: 140V Material: Polycarbonate Dimension (mm): 120*79*57 Note: This device is compatible with 110V60Hz Please use a screwdriver to adjust the minimum voltage. 1.Insert the voltage protector into the wall jack. 2.Plug in the appllance into the protector. Please note the working voltage and ampere of the appliance.This should comply with the protector. 3 Over Voltage:When the voltage rating of the appliance reaches the maximum capacity of the protector,it automatically cuts off the load/power. At the same time,the Over Voltage indicator lights up to alert the user that the voltage is too high thus the product cannot be used. 4.Under Voltage:When the voltage rating of the appliance reaches the minimum allowable capacity of the protector(fixed by the user),it automatically cuts off the load/power.At the same time,the Under Voltage indicator lights up to alert the user that the voltage is too low thus the product cannot be used 5.On Delay:When there are fluctuations in electric power,the device will protect the appliance by providing the output until it stabilizes.This would automaticaily turn on the On belay indicator to inform the user.The product needs to be delayed for 2 to 4 min to confirm that the power is stable and has been re-established.plugged in is protected. 6.Caution electric shock.

We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!

Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.

If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.